Light meters
Blendux meter User manual
User manual for Blendux meter. 10 pages in English. Read the original PDF, download or print a copy without registration.
10 pagesEnglish1.4 MB PDF

Loading your manual…Open PDF directly
Document details
- Brand
- Blendux
- Model / document
- Blendux meter
- Document type
- User manual
- Language
- English
- Pages
- 10
- File size
- 1.4 MB
- Category
- Light meters
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 3 · Read text
\
BIHrDUX
Phole-flcclrlc fx;crrrc llelcr
BltilDUX is a perfect Exposure Meter lor all Amateur cinematograph purposes, for day- .
ligt as well as artillcal light.
BLtilDUX is very simple to use and being self-contained, no battery is necessary and no
adjustments have to be made. lt tells you at a glance the correct flvalue at
which to set your lens, it being only necessary to direct the lens of the
'Blendux' to the scene lo be fllmed.
BltilDUX is free from errors, such as occur with optical extinction exposure meters due
to fatigue of the eye, or glere,
BlttDUX has two scales and accordingty a clear and wide measurlng range, the compa-
ratively small picture-angle used in Amateur Cine Cameras having been taken
into consideration.
Bl-ttDUX is.the tatest achievement in electrical science.View original page 3Page 5 · Read text
.I
Description of the Blendux. How does Blendux work ?
The photo electric exposure meter consists
of a high-grade moving coil measuring inslru- The light ref lected, from a scene is collected
ment, the front of the Bakelite case carrying through the front lens of the Blendux and
a lens behind which the photocell is fixed. through a diaphragm and thrown on to theThis novel photo-cell will, without connectionto any outside current circuit, when exposed photocell. The photocell produces, according
to ligth, generate a photo current, which waxes to the intensity of the light a stronger or weaker
stronger as the degree of illumination increases. current, which is sufficient enough to move theThe Blendux thus requires no additional source pointer of the very delicate measuring instru-of current. The Blendux can be relied upon
to be always ready for service at a moments ment contained in the Blendux
notice. The produced current is proportional to The scale of Blendux is calibrated to indi- the intensity of the ligt falling on to the photo-cate direct, f/values setting for Cine-Cameralenses, the shutter speed being r/rrnd of a second cell and it is therefore possible to exactly 'theas rnin case of -Fiilmo 70, 70 D. etc., Victor, measure the light intensity.
Auto-Kinecam, Cine-,,Kodak", Cine-Nizo, Sie-
mens Halske, etc., etc.
Digitally signed by mike butkus In case of working with artificial light or DN: cn=mike butkus, made days, measurements areon dull o=orphancameras, ou=29, with mike butkus range, red knob. email=mike@butkus.org, closer by pressing thethe
In this case the sensitiveness of the Blendux Date: 2020.04.19 23:20:50c=US-04'00'
is increased 40times and the red numbers on
the scale are made use of. With more brilliantlight, such as prevails in the open country,
of when exposing against the light, the close
range should be dispensed with.View original page 5Page 6 · Read text
www.butkus.us opening when aiming at the scene, an erroneous Directions for use. indication of the f/value will result, The lid
l) Cet your camera ready before taking of the leather case of the Blendux must be
the light measurement. swung quite clear and the fingers of the ope-
2) Direct the lens of the Blendux at the rator must not touch the front lens when
middle of the scene to be taken. lf the pointer taking a reading.
does not move due to the light being dull, The scale of the Blendux is calibrated
then press the red knob and take the fivalue for direct readings for cameras operating at
reading from the red scale l6 frames per second (Shutter opening 1800)
3) Take a short measurement before every and using standard films as shown in table
new picture. This is very important as the (a) having a sensitiveness of 2A-21o Scheiner.
light intensity very of en is changing rapidly. If using films of 180 Scheiner as shown in
table (c) take the reading preceding the indi- 4) The picture angle covered by Blendux is
vertical at 450 and horizontal at 7r,0. This is cation of the pointer. If using films of higher sensitivity, take the next higher reading follo-to be taken into consideration if the camera wing the indication of the pointer of the in-moves over a greater picrure angle, to cover strument.the greater angle or in a very long Panorama
shot. Two opposite readings should he laken, The indications of the Blendux are under
and the mean value considered. In case the all circumstances to be relied upon.
camera moves from a bright sky to a dull
landscape then the mean value must be made
use of.
Direct sunlight wilt do no harm to the
photocell, but if it is allowed to enter the lensView original page 6Page 7 · Read text
I
I,l
I
I
L_-_
[)ircct tlre Blendux at tlrr siiir of tirr ciulrefu tou:tr.ds tiic fcenc to be tilkcn.View original page 7From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.