Film cameras
Canon ELPH jr. / IXUS L-1 User manual
User manual for Canon ELPH jr. / IXUS L-1. 50 pages in German. Read the original PDF, download or print a copy without registration.
50 pagesGerman8.6 MB PDF
Loading your manual…Open PDF directly
Document details
- Brand
- Canon
- Model / document
- Canon ELPH jr. / IXUS L-1
- Document type
- User manual
- Language
- German
- Pages
- 50
- File size
- 8.6 MB
- Category
- Film cameras
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 3 · Read text
Handllng Precautions ,;r****;;,, ,**,,*,,*,n 1. This camera is not resistant to water, and should not be used outdoors if it is raining or snowing. lf it is accidentally dropped in water, contact an authorized Canon service facility. Keep the camera out of salt spray and excessive humidity. lf used at the beach, clean it thoroughly afterward with a dry cloth. 2. Store the camera in a cool, dry, dust-free place. Be sure to keep the camera out of direct sunlight, and away from "hot spots" such as the trunk or rear - window shelf of a car. Avoid places where mothballs are used, and use a desiccant in excessive humidity. 3. Do not attempt to disassemble the camera yourself, since there is high-voltage circuitry inside. 4. The battery may explode or cause burns if disassembled, recharged, shorted, exposed to high temperatures, or disposed of in a fire. 5. Use a blower brush to remove dust and sand from the lens and inside the camera. Do not apply any fluids to the lens or body. Take the camera to an authorized Canon service facility for a more thorough cleaning if necessary. 6. Film passing through X-ray examinations at an airport may be exposed and ruined even when loaded in the camera. Request a different method of inspection to avoid damage. 7. Color reproduction may be adversely affected if the film is left in the camera for a long trme. Always develop exposed film promptly. For German-speaking users This product is intended for use in residential, commercial and light industry environment. EI-z www.orphancameras.comView original page 3
Page 4 · Read text
F-
t'
This device complies with Paft 15 of the FCC Rules. Operation l=l is subject to the following two conditions: (1)This device may 15
not cause harmful interference, and (2) this device must ''
accept any interference received, including interference that
may cause Undesired operation.
Do not make any changes or modifications to the equipment
unless otherwise specified in the instructions. lf such changes
or modifications should be made, you could be required to
stop operation of the equipment.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordancewiththeinstructions,maycauseharmfu|
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. lf this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user I is {
l I encouraged to try to correct the interference by one or more of
the following measures:
. Reorient or relocate the receiving antenna.
.Increase the separation between the equipment and receiver.
. Consult the dealer or an experienced radio/TV technician for
help.
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the
interference-causing equipment standard entitled "Digital
Apparatus", ICES-003 of the Industry Canada.
Cet appareil num6rique respecte les limiteg de bruits
radio6lectriques applicables aux appareils num6riques de
Classe B prescrites dans la norme sur le mat6riel brouilleur:
"Appareils Num6riques", NM8-003 6dict6e par l'lndustrie
Canada.
| ? The CE Mark is a Directive conformity mark of the
\ E European Community (EC)
tr-:View original page 4Page 5 · Read text
Thank you for purchasing this Canon product.
Before taking pictures, please read these instructions
carefully for a thorough understanding of how the
camera operates.
Table of Contents
These instructions are divided into four sections:
lntroduction, Basic Operations, Advanced Operations,
and Additional Information. When first using the
camera, be sure to read the instructions from the
Introduction.
i--ffffiiil-
i ffre following convention is used in these instructions: i
you shoutd observe when usins the I g gil:ffs
ii
iim ii IJJ Additional information on using the camera.
;';;ilffi;t Handling Precautions ..........2
Table of Contents .........4
ADVANCED PHOTO SYSTEM Features........6
Quick Reference... ......10
Nomenclature ......12
Attaching the Strap.... ........14
Basic OperationstE ,1i;n E Loading the Battery
B LoaOing the Film Cartridge ........16
' Checking the Film Speed and the Maximum
Number of Frames..... .......18
E Turning the Power On .
Checking the Battery Power .....20
E Holding the Camera. .....21
E Viewfinder ......22
Parallax Compensation for Close-ups ......23
www.orphancameras.comtr-+View original page 5Page 6 · Read text
.G*
E Setecting the Print Type (C|H/P) .......24
E Strutter Button Action.... .......25
Shooting through a Window .....25
Green/Orange Indicators ..26
E Removing the Film Cartridge.... ........27
Film Cartridge Processing... ......28
Handling Film Cartridges After Exposure ........28
Advanced Operations
Focus Lock .......3l Date and Time lmprinting.... .....30
Switching the Date Format .......31
Setting and Adjusting the Date/Time ............32
lmprinting Titles ..34
Selecting the Title Language .... ........34
Selecting the Title .......35
Changing the Flash Mode .....36
Red-eye Reduction Function.... ........37
Auto Flash Mode without Red-eye Reduction....38
Auto Flash Mode with Red-eye Reduction .... ... .39
Flash ON Mode .... ....40
Flash OFF Mode ......41
Slow-synchro Mode with Red-eye Reduction ....42
Self-timer Shooting. ....43
Shooting with the Optional Remote Control ..44
Replacing the Remote Control Battery .....45
Additional f nformation
,......464l Troubleshooting ......... Questions & Answers.... ....47
Specif ications ......48
tr-sView original page 6Page 7 · Read text
ADVAN.ED PHoTo SYSTEM E,-
l------r----------
an Advanced Photo System camera. This i This is
system as well as Canon's advanced technology has
made it possible to produce a camera that is smaller
than any previous camera.
Here are some of the special new features of this
system.
E New Film
The 1X240 new film comes in
a compact film cartridge with Visual exposure indicators
no leader. This new drop-in
film can be easily loaded by
anyone, and replaces all
previous hard{o-load films.
ln addition, the visual
exposure indicator on the top
of the cartridge shows whether the film cartridge is
unexposed, exposed, or processed.
*This camera model does not mark the film to show when it
has been partially exposed ( D indicator).
El New Gamera Size
The Advanced Photo System ,. allows cameras and film I
cartridges to be much more i
compact than previously possible i
(Canon modelcomparison). \-
Moreover. Canon's advanced
technology has made it possible to produce this ultra
compact camera.
L--
www.orphancameras.comtr-oView original page 7Page 8 · Read text
Features
-l
Lfl New Type Prints
The Advanced Photo System allows the camera to shoot
three types of prints: in addition to classic print types (C
print), you can now shoot wide-angle (H print) and panorama
(P print) prints.
The Advanced Photo System can also imprint date/time
information on the back of the print, or on the front and back
of the print. The system can also imprint title text on the back
of the print.
'Character size, shape, color, position, and ability to print on
both sides may vary according to the individual photo shop.
tlt*lll
Back of
E New Processing Methods
Previous 135 (35mm) film has always been returned from the
processing lab as negative strips. This has made ordering
reprints inconvenient since each picture must be found on the
negative strips. With the Advanced Photo System however, the
negative film is returned from the certified shop reloaded in its
cartridge, accompanied by an index print. Unlike hard-to-see
negative strips of previous cameras, this index print (where all
shots can be viewed) makes reviewing prints much easier.
Users can now order reprints simply by matching the lD on the
back of the print or on the index print with the lD on the film
cartridge, and then specifying the print number to be reprinted
at the photo shop.
J
El-tView original page 8Page 10 · Read text
1. Simple film cartridge loading. (+ p. 16)
. Unlike previous 135 (35mm) film, there is no need to open
the back cover and pull the film leader across.
2. Choose the print type with the print type
selection lever. (+ p.2a)
I You can choose from three print types.
. C print: Classic print
. H print: Wide-angle print
. P print: Panorama print
3. A variety of data (lX information) is recorded
magnetically on the film surface.
. All the information described at left can be recorded on the
film.
. The exposure information is used in the printing process to
produce better quality prints.
4. Exposed film cartridges can be processed for
printing at Advanced Photo System certified
shops. (-+ p.28)
I After developing, the shop will return your pictures, along
with an index print, and the film caftridge with the
negatives inside.
. When ordering reprints from a certified shop, just match
the lD on the back of the print or on the index print sheet
with the lD on the film canridge, and specify which prints
you want.
tr-qView original page 10Page 15 · Read text
LCD Panel
Date Indicator Two-sided Date lmprinting
Selection Indicator
Title Selection Indicator
Self-timer/Remote
Control lndicator
Frame Counter
Battery Check Indicator I Rasn ON Indicator
Film Cartridge Indicator Slow-synchro Indicator
Red-eye Reduction Indicator
Only the necessary indicators will be displayed on the
LCD panel.
Before using your camera, attach the strap provided.
Be careful not to drop the camera.
Pass the strap through the
strap attachment on the
left side of the camera.
. Follow step O before step
@.
Itll"il"pil+'tt;il;i,;;ffii press the Select (+ p. 32), i i to
i Set (+ p. 31), and the film i
L__:::11!_I_:111t_1lt_',!): _:
Push-button projection
El-t+ www.orphancameras.comView original page 15Page 17 · Read text
E toaOlng the Film Cartrldge
Film cartridges
. Use 1X240 film cartridge.
. Previous 135 (35mm) print O (Unexposed) lndicator film cannot be used. t-
. Processing can be done at
any certified shop. . Use film cartridges whose \qa) visual exposure indicator is ttlL\b
O (unexposed). tU
1. Open the film cartridge
compartment cover.
. Lift the film cartridge
compartment cover crank
O and rotate left @ to
open the cover on the
bottom of the camera.
2. Load a new film
cartridge.
. Load with the visual
exposure indicator end
facing outwards.
3. Close the film cartridge
compartment cover.
. Close until it clicks.
tThe film cartridge
indicator on the LCD
panel lights up.
www.orphancameras.comE-toView original page 17Page 18 · Read text
4. The fllm automatlcally *" g to the flrst advances eJ 9rl frame and "1" 18
dlsplayed In the frame
counter.
.lf "1" is not displayed,Film canridg€ Frame counter
indicalor check if a new film
cartridge is loaded
correctly.
2
aL .lfE(exposed) and Ott (processed) film cailridges are
loaded, "f in the frame counter
and the film cailridge indlcator
willblink. Reload witr aO
(unexposed) fi lm cartridgo.
. Film cartddges with the D (partial) indicator cannot be
used in this camera.
.lf a film cailridge with the D indicator is loaded, the
El-tzView original page 18Page 19 · Read text
Loadlng the Fllm Cartrldge
Checking the Film Speed and the Maximum
Number of Frames
Press the main switch to turn
the power off, then press the
flash mode button.
tThe film speed appears in
the date display area, and
the frame counter displays
the maximum number of
frames. (The illustration on
the left shows ISO 200 as
the film speed and 25 as the
maximum number of
frames.)
www.orphancameras.comE-trView original page 19Page 21 · Read text
TUmlng the Power On
Checking the Battery Power
Check that the {3 indicator is displayed on the
LCD panel when the power is turned on.
Battery check indicator
Battery Check lndicator
{= (Lit): Battery is full
Gr (Lit): Have a new battery ready
G. (Blinks): Replace the battery (+ p. 15)
. Before shooting, be sure to check the battery E . Use one lithium battery (CR2).
power.
. When traveling or planning to take many pictures,
be sure to take a supply of spare batteries, they
may not be available where you are.
. Shooting capacity with a new battery - Approx. 18
film cartridges of 25 exposures with 50o/o flash
use. (Data based on Canon's Standard Test
Method.)
. Shooting continuously with the flash will cause the
battery power to fall momentarily, and the LCD
panel display may be incorrect. Tum the power off
and wait a while before turning it back on.
El-zo www.orphancameras.comView original page 21Page 22 · Read text
E XolOing the.Camera
To take sharp pictures, hold the camera firmly so that it
does not move.
. Hold the camera with both hands.
. Ke€p your elbows close to your body.
. Hold the camera against your nose and look through
the viewfinder.
al . Be careful to keep hair andv7 fingers from blocking the
lens, AF light emitter/
receptor, light metering
window, and flash.
AF light emitter Flash
Light metering window
AF light receptor
Lens
El-zrView original page 22Page 23 · Read text
Viewfinder Frames
Close-up frame
When the shooting distance is
between 0.45 and 0.6 m (1.5
ft. and 1.9 ft.) compose your
Plcture Frame picture within this frame. The
Compose your picture area above this frame will not
within this frame. be included for C and H print
(H print) pictures. (+ p.23)
r_l
| | ll__J | 1l AF Frame Tl]- Place this frame over the
subject you wish to take.
www.orphancameras.comE-zzView original page 23Page 24 · Read text
Parallax Compensation for Glose-ups E
When taking photographs of subjects as close as
0.45 to 0.6 m (1.5 to 1.9 ft.) to the camera, the
camera will cut off the top portion of the picture that
is visible in the picture frame. This is called parallax
displacement.
To take pictures of subjects at 0.45 to 0.6 m, follow
the steps below to use the picture frame to compose
the picture.
1. Position the AF frame
over the subject and
press the shutter button
halfway.
. Check that the green
indicator is lit.
AF frame . Keep the shutter button
pressed halfway.
2. Move the AF frame so
that the subject is below
the close-up frame and
take the picture.
. Be careful not to change
Close-up frame your distance from the
subject.
I
o..""n from the viewfinder -f
El-ztView original page 24Page 25 · Read text
E Selecting the Print Type
You can choose from three print types with this
camera: C print, H print or P print.
Print type selection lever
Use the print type selection
lever to select the desired
print type.
. You can change the print
type in mid roll.
The viewfinder field changes when the print type
selection lever is used. The black areas in the
viewfinder will not be printed.
C print H print P print
t---_lEEEt=<=Qt:
Choose a print type suitable for the subject you are
shooting.
www.orphancameras.comEl-z+View original page 25Page 26 · Read text
El Strutter Button Action
This camera has a two-step shutter button. tr
1. Place the AF frame over
the subject and press the
shutter button haltway.
t The subject is focused.
. Check that the green indicator
is lit. I . Keep the shutter button halfway
pressed.
2. Press the shutter button
fully.
t The shutter is released.
. Press the shutter button gently.
. There is a very short interval
between the shutter button
being pressed and the shutter
being released. As a general
guide, it is best to hold the
camera still until you hear the
film start to wind fonrvard.
Q Shooting through a Window
. lf you are taking a picture through a
suuiectl windowappropriateset angle,the cameraand asat closean to
/ \ Window the window as possible. lf you are
too tar away from the window, or at /\ an inappropriate angle, the camera
may focus on the glass of the H' uamera window rather than the subject.
El-zsView original page 26Page 27 · Read text
Shutter Button Actlon
Green/Orange Indicators
When the shutter button is pressed halfway, the
indicators light up or blink to indicate whether or not
shooting is possible.
Green indicator
Orange indicator
Green indicator
Lights up: Ready for shooting (Subject
focus)
Orange indicator
Lights up: Flash has charged
Blinks (4 times/sec.): Camera shake warning in
"Flash OFF" mode*
I () i :Y: :::irl :: i:::l T :.1i:t11 i :T::ri
El-zo www.orphancameras.comView original page 27Page 28 · Read text
fiil Removlng the Film Cartridge
The lilm rewinds automatically when it reaches the end.The frame counter counts down during film rewinding. tr
Check that the o mark on the LCD panel is blinking
and that the frame counter display has returned to
zero, then remove the film cartridge.
1. Check that the o mark is
DATE blinking and that zero is 'sn 9eJ shown in the frame
counter display.
.lf the film has stopped
rewinding in mid-roll, press the tr film rewind button nt .
2. Open the film cartridge
compartment cover.
. Lift the film cartridge
compartment cover crank O
and rotate left @ to open the
cover.
3. Remove the film
cartridge.
t The film cartridge indicator
on the LCD panel
disappears.
t The visual exposure
indicator on the film cartridge
becomes $ (exposed).
Rewinding the film before it is
finished
. Press the film rewind button rro .
t The visual exposure indicator on the film
cartridge becomes I (exposed). -6;Gi--Ei:ili. ;;;;;;;;;;ffi;;-il-ffi;ili I qr (MRC) feature of the Advanced Photo_Sy_sl?i_-_______ji
El-ztView original page 28Page 29 · Read text
Removing the Fllm Cartrldge
Film Cartridge Processing
. Exposed film cartridges can be processed for printing at
Advanced Photo System certified shops.
. All certified shops do the following:
O Return your cartridge with the negatives inside.
@ Process all three types of prints.
@ tvtale an index print sheet.
@ Use the print quality data for better quality prints.
@ lmprint the date and title on the back of the print.
Handling Film Cartridges After Exposure
. When ordering reprints at a certified shop, be sure to
match the lD number from the back of the print you want or
from the index print with the lD on the film cartridge before
handing in your film cartridge.
. Handle and store index prints and returned lilm cartridges
carefully.
. Your camera sets the visual exposure indicator on the
cartridge to 8 (exposed) whether the film has been
completely or only partially exposed.
. After processing, the visual exposure indicator on the
cartridge becomes O (processed).
. Your camera does not accept film cartridges not marked
with the O (unexposed) indicator.
. Do not place cameras or film cartridges near televisions,
speakers, or other sources of strong magnetic fields.
www.orphancameras.comE-zsView original page 29From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.