Home/Butkus archive/Kinax
Film cameras

KINAX Provence and Picardy User manual

User manual for KINAX Provence and Picardy. 21 pages in English. Read the original PDF, download or print a copy without registration.

21 pagesEnglish5.8 MB PDF
KINAX Provence and Picardy manual cover
Read the manual Original PDF
Download PDF
Loading your manual…Open PDF directly

Document details

Brand
Kinax
Model / document
KINAX Provence and Picardy
Document type
User manual
Language
English
Pages
21
File size
5.8 MB
Category
Film cameras
Document date
Not specified in catalog

Search available document text

Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.

Page 6 · Read text
www.butkus.us
  3o Tear off the sticky paper from the film'
freeing the paper-leader of the roll. Draw the
end of the latter, thread it in the wide slit
                                       upperof the take-up spool which is in the
chamber. Coil up several times with the win-
ding key (fig. 3) so as to stretch the paper'
                    Ascertain that the win-    fig. 3                   ding is correct at start,
                                   if it is wound on a slant,
                      straighten it at once (the
                 black side is on the
                         inside).

                                                                         Digitally signed by mike butkus       mike              DN: cn=mike butkus,
                                                         o=orphancameras, ou=29,
                                                            email=mike@butkus.org, c=US
                                                                Date: 2019.01.09 10:12:17 -05'00'        butkus
                                                                                                its                   40 Replace the back of the camera in
                         original position. A slight pressure is sufficient
                     to lock it.
View original page 6
Page 7 · Read text
50 Lift up the sliding window cover which
                           is on the back of the camera (fig. a). Wind up
                   the film with the key until a hand and the
                  number (1) appears (fig, 5) and then close the
                      cover ; the camera is then ready for taking
                      the first photograph.

                                                                                                  fig. 6

    fig. 5
 TAKING THE PHOTOGRAPH

 Open the camera by pressing on the button
(17) when it automatically erects and a slight
pressure on the baseboard ensures complete
rig idity.
View original page 7
Page 8 · Read text
www.butkus.us
  Focusing is effected bY  rotation of the
front fens collar, the distances being engraved
from 7 feet to infinitY


 fis. 7            The precise distance
                   at which the camera is
                   being used is indicated                          fig. 8
                   in the frame above the
                     lens collar (fig. 7).



                                                                    the                    Adjust the diaphragm by means of
                       indicator (7) located at the lower shutter ring
                          (fig.8).
View original page 8
Page 9 · Read text
INSTANTANEOUS EXPOSURES
                   The duration of the exposure is controlled
                   by rotating the outer shutter ring and setting
                    the required speed against the red pointer at
                     the top. The speeds given are 1110, 1 l2S, 1 ISO
                  and 1/150 of a second.
                                                                                  fis.l0                       Select the shutter speed
                      required by rotating the shut-
     fis. e             ter ring until the speed is
                      indicated by the red mark.
   Set the shutter by depressing the leverl6 (fig 10).
  The shutter is released by pressing gently and
without jerking on the button (6) which is on
the body, or by means of the plunger of a cable
release, which is threaded into the socket (1b)
which is situated on the lower left hand strut.
View original page 9
Page 11 · Read text
THE DELAYED ACTION RELEASE
                                                                              I
                                                                                                                                il
  The Kinax Provence is fitted with a delayed-action release
(enabling the user to photograph himself) and the following
procedure must be followed to make the best use of  thisdevice.
  Fix the camera in the required direction,  either on a tripodfitted into one of the threaded bushes                                                                                          fis' tlon the body, or, if this is not possible
by placing it on a firm and horizontal    fffi
object (table, piece of furniture, etc.) bv       iji
means of the base support (g) (General   lt,Description).                                                 ,.,
                                                     io  Centre the image in the viewfinder,
                                                                              lt-not forgetting to reserve a place for the
operator.
View original page 11
Page 12 · Read text
www.butkus.us
        Take care to hold the camera stea-
                                                                                                                   :I         dily in position and then
         a) Set the shutter speed by turning the
                                                theI          shutter ring (10) and setting
            shutter as indicated (fig. 11).
         b) Set the delayed-action movement
          by depressing the catch towards the
           small lever (12) (fig. 12).
                                                                                                   fig' 13         c) With the finger nail  release the
                     tis. 12                 stud (13) (fig. 13) which sets the
                                     clock work in operation.
                                 Between this time and the release of
                           the shutter, a period of 10 seconds
                                   elapses which is sufficient to allow the
                                   operator to take his place in the field
                                    of the viewfinder.
                                 Wait for the " click " of the shutter
                                     before touchjng or moving the camera.
View original page 12
Page 13 · Read text
METHOD OF HOLDING THE
              CAMERA
                     1o For vertical photographs : Grip the upper
                      part of the camera with the right hand. ering
                    the view-finder to the level of the eye while
                   pressing the camera against the cheek.
                  Support it with the left                    ris. t5
                 hand, with the elbow
                   close against the body,
   fig. l4           and press with the fore
                     finger on the button (6)
                            (fig. 1a).
  20 For horizontal photographs : Grip the
camera with both hands, the two elbows
against the body, the view-finder at the level
of the eye and with the forefinger of the left
hand, press on the release button (fig. 1b).
View original page 13
Page 14 · Read text
www.butkus.us
     THE TAKING OF PHOTOGRAPHS
       WITH THE KINAFLASH

        The Kinax Provence is fitted with an l.P.O.
        shutter with a  synchro-f lash connection
        permitting the use of flash lamps for use
        with the Kinaflash. This accessory, which is
                                                                       f itted to the camera andF       very practical, is
        held in position by means of the bush on the                      fig. l6KtR        camera baseboard. The flexible cable conduc-
                             to the synchro-Jlash socket (3)bil         tor is connected
Fr     and the connection to the top of the
                                                                     shouldft        shutter which is marked by a red index. This operation
                                                                        before       always take place before setting the shutter and
                                                                             the          fitting the lamp. The scale of exposures is indicated in
        guide given below..
View original page 14
Page 15 · Read text
TABLE ()F I{UMBER GUIDES FOR FLASH LAMPS
  For each lamp and for each emulsion there is a " number-guide "which determines the lens diaphragm  to be used in conjunctionwith the shutter apeed.                                                                                                                                                   .,I
  Shutter speed         rating of speed being used    Power of lamp being used                                                        I
                                PF14 | PF25 | PF56
                   31o-33o-Sch or 80-125 ASA
                   28o-30o Sch or 40-64 ASA
                     31o-33o Sch or 80-125 ASA
                   280-300 Sch or 40-64 ASA
Exomple; Film used : super sensitive panchromatic 2gl80 scheiner.         Shutter speed :  1/50th second.
      The number-guide.corresaonding to this is 56, in-accor-
dance with the table.gfvgn a.pove. To catcilate ihe siop%'116, on"
divides this numb.er. by the distance at which the subjebt is iiiuateO.
lf the su.bject is at 4 yards for example, from ttre-s;'rtG-oJ'ilruml-
nation, the lens gtqR to use wiil o'e 5o divided by 4:  f i+, or thenearest, such as f 11.
View original page 15
Page 16 · Read text
www.butkus.us
              CLOSING THE CAMERA
                               It is necessary to return the lens to the infinity
                    position be{ore closing. The camera is then closed
                by means of pressing back the protruding articu-
                lated upper struts towards the camera back
               and then the baseboard should be gently secured
                     in the closing catch (fig.17).
              To close the optical viewfinder fold down the
                  front frame and hold down in position with the
    fis. l7            left hand and then press down the rear sight
                      until a " click" is heard'
       UNLOADING THE CAMERA


                                                                                                                                                          : When the eight exposures have been taken
  10 Turn the film wind-up knob (18) until the end of the film has
passed the red window at the back of the camera'
View original page 16
Page 17 · Read text
20 Open the back of the camera as has been
                shown for loading.
                     30 Push the exposed  roll towards the left and      *
                        release  it  f rom the take-up stud. The thrust of the
                     spring from the other end will hef p to withdraw
                                it from the film-chamber  (fig. 18).
                                                                                            fig. l9
                   40 Stick down the end
                    of the paper trailer with
 fig. l8              the gum-strip provided.
  5o Take the empty spool of the lower reel
holder and place it in the upper film-chamber.
  60 Turn the wind-up knob until the stud
engages with the film spool and rotates  it.
 The KINAX camera is now ready for re-
loading with a new film.
View original page 17
Page 18 · Read text
'!
                                     www.butkus.us                                                                           fu
              THE' ACCESSORIES FOR THE
          KINAX PROVENCE CAMERA                                                  F::e
                            o





'1     l    THE COLOUR FILTERS.

 1
  I
:l
                                                                   threaded         The Kinn f.  : 4,5 lens which is fitted to this camera is
                                                               .vellgJrv (for ortho emulsions 2 x )' I          internally to enable colour filters in                                              green (for Panchro emul-

$rl         rionr g *), orange (for panchro emulsions 5 x), Ied(for panchro
         emulsions 8 xi, 6iile (for pan emulsions in conjunction with artificial
                                   f ight 1 t/z x), ultra uiolg! (for use in high altitudes above 3.000 {t' or
          at the seaside during very clear weather).


ffi
View original page 18
Page 19 · Read text
THE SUPPLEMENTARY LENSES

  To use the camera at distances less than 5 ft. it is necessary to use
supplementary lenses and these may also be screwed into the front
fens collar the Kipor for 3ft.3 ins. and 1It. 7rk ins. the focusing
scale should then be set at infinity. These lenses are of very great
value enabling one to photograph very small objects or parts of
documents.

                                                                                                    rI
                                                                                                    -lr
                                                                                                                                                                                                                                                                                    +li
THE LENSHOOD

  The Parkin is recommended for all photographs against the light
where it is possible that the direct lighting will cause reflections.
It may be fitted directly on to the lens or over the colour filter which
is already mounted on the lens.
View original page 19
Page 20 · Read text
www.butkus.us                                                                                 lt
                                                     \*.I
            tufte pft'etag,tap'fta with aati(icial i   T"                                                      *
   I
J                                                                                                                                                                                   .  trt         use the   INAFLAS

        This accessory is  very
       simple and practical and        consists of a simple bodY
     and a  flat battery fitted
        with a reflector, best suited
        for use with these lamPs.
      The whole is supported by
     a metal strut and is fitted
        to the camera by means of
     an adaptor screwing into
        the bush on the baseboard.
      A cable conductor connects
       the battery to the connec-
        tion on the shutter of the
        camera.
View original page 20

From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.

PDF verified 2026-10-10.