Mamiya M645 SV Pack User manual

64,5svPA'K
AN INSTANT
OPERATION
MANUAL
YourHandyPocketReference
This pocket guide to your "645
SV PACK"  is  a  basic  user'
smanual and  briefly explains
major features,                      as               such                            the      Remove the Battery Chamberviewfinder,                 and                        focus-           loading
Ing-                          Cover
This is not an instruction man*       by slidingthe Locking Latch in
ual. So,  please  refer  to  the        the directionof the arrow.larger manual  for  detailed
answers to specific questions.





          @' @
                       #           {'m
 Position of AM-Lever         0perationof the Shutterreleasebutton
 Set the AM-Lever of the lens      'lst stroke  : A slight pressure will light the
 on "A" and make sure that       metering  information  display  in the AE                                             viewf inder.
 the Exposure Meter Coupler   2nd stroke  : Continued oressure will release
 engages  properly with  the       the shutter and advance the film.
 ApertureRing CouplingPin.         {. Setcamerathe Shutterbody to Releasethe Red SelectorDot.    on the
                            www.orphancameras.com

Insert the battery.                Battery Check
Make sure battery @ e  marks   Push the Battery Check Button
are properlyaligned.            and check for illuminationof the
                                    Battery Check Lamp.

Insert the Lithium Battery into    Adjust  the diopter  to your  e'
the grip.                         Rotate the  diopter adjustm
Lift the cover off and insert a    ring until you can clearly see 1
2CR-5,6 volt Lithiumbatteryinto   focusing screen line in the vie
the batterychamberproperly.           f inder.

                              www.orphancameras.com

Flemove the Dark Slide.       AE mode
Store it in the Dark Slide Slot.     Set the ShutterSpeeddial to "A".

Position  of AM-Lever         Operationof the Shutterreleasebutton
Set the AM-Lever of the lens    1st stroke   : A  slight pressure  will  light the
on "A" and make sure that       metering  information  display  in the AE                                            viewfinder.
the Exposure Meter Coupler   2nd stroke  : Continued pressure will release
engages  properly with  the       the shutter and advance  the film.
Aperture Ring Coupling Pin.        * Setcamerathe Shutterbody to Releasethe Red SelectorDot.    on the
                            www.orphancameras.com

Place  the  film  in the  pre-   Feed the leader paper  to
loadable  Film  insert.         the Take-up Spool by pul-
                                  ling the leader paper gently
                          as shown  in the diagram.
                       Then insert the tip into the
                                  slot of the Take-up Spool.

Align the start mark.      Open the back Cover of  Insertion of  the  Film
Rotate the Take-up Spool in   the Roll Film Holder.       lnsert
the direction of the arrow,  Hold down ButtonO in tfre  Place the Film Ins;ert into
and align the film start mark   directionof the arrow and  the  Roll  Film Holder as
with the mark on the Spool  pressButton@.           shown and close the Back
Clip.                         www.orphancameras.com     cover.

Film Speed (lSO) Dial       Advancing   the  Film  to the
Set the dial with the speed   First Frame
of the loadedfilm.           Press  the  Shutter  Release                                 Button  or the  Battery Check
                                 Button. The Film will be auto-
                                  matically advanced and  will
                               stop when  #l  will appear in                                    'the                                   Film Counter Window.

TroubleShooting/Careof theCamera
Uniquely designed to prevent errors, 645 SV PACK incorpo-
rates numerous  safety  features, so  if you can  not release
the shutter, or remove a lens or holder,  it is most likely due
to  user error rather than  a camera  malfunction.  Should
something  appear  to  go  wrong,  be  sure  to  check  the
following points.
The  Shutter  Release  Button does  not depress.
O Does the Battery Check Lamp light up? (lf it doesn't, replace
  the battery.)
 o Has the Dark Slide of the Roll Film Holder been removed?
The Mirror  is locked  in the up position.
oHas the Mirror Lock-up Lever been set to "M.Up n"?
The  developed   roll  film  has 1 or  2 frames  less  than    it
should have.
o Did you properly align the start marks of the film and the Roll
  Film Insert?
The Film Holder can  not be removed.
o Has the Dark Slide been inserted into the Film Holder?
Care  of the Camera
 * Never touch the Shutter Curtain or Mirror. lf they need clean-
  ing, please use a hand blower and soft tissue paper or a
  feather.
 * Do not leave the camera in the Mirror Lock-up condition. This
  will avoid burning of the Shutter Curtain. lf the camera  is
  pointed directly towards a bright sun, Please always return the
  Mirror to normal position or put a Lens Cap on the Lens.
* Do not remove the safety cover of the Flash Synchro Terminal
  except when using flash.
x The Electric Contacts of the camera and accessories should
  be kept clean.

    Mqmiyo
                                                                                                                                                                                                                      flE]+                       www.orphancameras.com                                                             Printed in Japan