Mamiya RB67 Pro-S Roll Film Holder User manual

www.orphancameras.com,

120/220/120 64.5

O—Ib7 4 bAmILI—
Roll Film Holder

ba

BAR Same
English Instructions

‘www.orphancameras.com

Specifications
type |ramusea| Fim abvaes
| ‘One-toke ever fim advanca (Aor 70
Pro 20ral1im | 120
6x7em | 10 | winding. can bo wound n several shor
raider | rottim | ‘ents toes)
‘Automate dvble-exposure prevention
i Fim wind-top automatic ease
|Preszaorottim | 220 | 6x 7om | 20 | samipe exposure lcblanaie optonaly
. Film counter: Automatic rsetting type,
FRedincex mar sappeers ipo compe-
movin ; fon offi wing
2orontim note | 120 ex 45em| 16 | Prowced wih darkside csocaton |
| provertv device and memo ip
«Ifthe side lock of the revolving adapter is
enellich rately not pushed flyin or ou, the shutter wil not
older. be released because of the shutter locking

1, Before attaching the holder, confirm that
the upper and lower side slide locks (A) are
(on the left end of the indented portion when
viewed from behind the camera body.
(Photo ME)

NOTE:

Should either slide lock be moved to the
right while nothing is attached to the
revolving adapter, the slide lock release
lever (B) will engage and the slide lock
will not move. If this happens, press the
release lever (B) and return the slide
lock to the open position.

2. Attach the roll fim holder and slide both
‘lide locks firmly in the direction of the arrow
mark. (Photo Ed)

Safety device. Always operate the slide lock
securely.

‘© If closing the lower slide lock is neglected,
the safety device of the Pro-S holder will
prevent the dark slide from being removed.
«© Ifthe dark slide is completely inserted, or
ifthe fm is not loaded, the shutter release
button cannot be pressed, leading to picture-
taking failure.

The photos used in these Instructions ar
those of Pro-s 120 oll film holder.