Mamiya RZ67 Pro-s Roll Film Holder User manual

\www.orphancameras.com,

O—IbI 4 IDAKIDI— RZ
Roll Film Holder RZ
Rollfilmkassete RZ

Dos rollfilm RZ

BAR Re

English Instructions
Deutsch Bedienungsanleitung
Francais Mode d'emploi

www orphancameras.com

120/207 ¢ VAM NDA IAW
120/220 Film Selector Dial

(em eat EDK
Position setting guide pin holeuides

D4 LMF
Film Type Display Window

Types and Specifications

© 120 Roll Film Holder RZ

Film Type: 120 roll fim.

Negative Size: 67cm (actual size of 56
%69,5mm)

Number of Exposures: 10,

Film Advance System: The fim is ad-
vanced with a single 114° stroke of the
CCocking Lever, and can also be advanced
with the Film Advance Knob of the Film
Holder.

‘Additional Features: Builtin double x-
posure prevention, multiple exposure
provision, automatic film wind-stop re-
lease, Exposure Counter with automatic
retum, Film-Unadvanced indicator, buit-
in Film Speed Dial, automatic Dark Slide
lock and release, Memo Clip, builtin
Dark Slide Siot

© 220 Roll Film Holder RZ

Film Type: 220 roll fm.

Negative Size: 67om (actual size of 56
69,5mm)

Number of Exposures: 20

‘Additional Features: Same as 120 Roll
Film Holder RZ.

© 120/220 Roll Film Holder RZ
6x6
Film Type: 120/220 roll fim.
Negative Size: 66cm (W/Finder Mask
‘6x6cm)
Number of Exposures:

12 (120 Roll Film)

24 (220 Roll Film)

‘Additional Features: Same as 120 Roll
Film Holder RZ.

© 120 Roll Film Holder RZ
6x4.5

Film Type: 120 rol fim.

Negative Size: 64.5cm (WiFinder Mask

6x4.5cm)

Number of Exposures: 15

‘Additional Features: Same as 120|Roll
Film Holder FZ.

Using 120/220 Roll Film
Holder RZ 6x6

When using the 120/220 Roll Film
Holder 66, the position of the Pressure
Plate differs according to the film type
used (120 or 220 roll film), necessitating
the position of the Pressure Plate to be
‘changed. In this case, take the following
stops.

1. While pressing the 120/220 Film
‘Selector Dial in the Film Insert, turn it by
about 180 in the direction of the arrow.
The Pressure Plate will float up to turn,
2. The film type used is indicated by
‘humeral 120 or 220 on the Film Type
Display Window on the Pressure Plate,
‘As shown, set the plate correctly in posi-
tion, When correctly set in position, two
pins will fit closely into the plate position
setting guide pin holes.

Note: To stall Roll Film In-
sert to the Roll Film Holder,
please refer to page 21 of
instruction manual for the
body.