Film cameras
Minolta A5 User manual
User manual for Minolta A5. 22 pages in English. Read the original PDF, download or print a copy without registration.
22 pagesEnglish2.0 MB PDF

Loading your manual…Open PDF directly
Document details
- Brand
- Minolta
- Model / document
- Minolta A5
- Document type
- User manual
- Language
- English
- Pages
- 22
- File size
- 2.0 MB
- Category
- Film cameras
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 6 · Read text
Each step is explained in detail on the following pages.
Advance the film, using the Focus. . . and compose your 5 Press the shutter release.13 rapid film advance lever. picture.
ilView original page 6Page 7 · Read text
I Pull out back locking 2 Pull up rewind knob as 3 Insert a roll of film, 4 Pull out enough film
tab and swing camera far as it goes. then push back rewind to insert it in slit.
back wide open. knob
www.orphancameras.comView original page 7Page 8 · Read text
I
5 Advance film lever 2 6 Close back cover, then 7 Set the exposure counter 8 Advance film lever three
complete turns push back locking tab. to the red dot. (It can times pressing shutter
(Pressing shutter To take your next be turned to clockwise release each time. You
release each time). picture, start with stop way). will seeexposurecounter
Make sure sprockets 3 advancing the film. is set to No. 1.
project through film
slits.View original page 8Page 9 · Read text
I Sertlng Fllm Speed (ASA or DIN rotlngs)
K'l.,fi Set the film speed indicator on the camera back to the film speed of *-_:xl the film you have just loaded in your A-5. For example, if the film
speed is ASA 100 (DIN 21), you simply set the indicator to the figure ',o-IA
ASA 100. In the film speed is which is not listed case 80, on the dial. 3.;'ii"ihI pointer indicator set to a spot between 100 the and 50. tou
,
I Whoi ore Fllm Speeds ond ASA or DIN Rotlngs ?
Film speeds or ASA (American Standards Association) or DIN ratings are a means
of classifying film according to their light sensitivity. The higher the numerical
rating, the more sensitive the film is to light. A film with an ASA of 200 is more
sensitive to light than a film rated ASA 80. You need less light to take a picture with
a film rated at 200 than you would with a film rated at 80.
I Where to find the ASA or DIN rotlng of ihe fllm you're uslng
Inside every box of film you buy is a sheet giving information about the film. On this
sheet you'll find the ASA or DIN rating.
www.orphancameras.comView original page 9Page 12 · Read text
The lens aperture ring is turned to control the amount of light passing through the lens. Small
numbered openings are used for dim light and slow films . . . large numbered openings for bright
light and fast films . as per your light meter readings. or suggested lens openings on the in-
formation sheet included with each roll of film.
The shutter speed ring controls H igh speed settings are used to
the length of time the shutter is stop action. Lower speeds are for
open to pass light through the
scenes and dim-light pictures. lens.View original page 12Page 13 · Read text
Setting exposure is this simple: you read the light
value on the meter and set it to the light value indi-
cator line. That is all. You can get a correct light
value by turning either the shutter speed setting
ring or the lens aperture setting ring separately
until the selected light value appears on the line. If
you turn the shutter speed setting ring. the f igures
on the light value scale move, while the pointer line
moves as the lens aperture setting ring is turned.
Once you have set the correct exposure, you simply
turn both the shutter speed setting ring and the lens
aperture setting rin.q at the same time to select the
shutter speed-F stop combination you want to use.
t2 www.orphancameras.comView original page 13Page 14 · Read text
This single stroke film advance action automaticallv advances the f ilm. cocks the shutter and
counts the exposure, all at the same time.
You can turn the lever either at one full stroke (right) or in several strokes (left.) You may if
you wish advance the film before setting the exposure. You will not experience any hard turning
when setting the shutter at high speeds after the shutter is cocked.
t 3View original page 14Page 15 · Read text
In the center of the frame is a rectangular color
area. You will notice the part of your subject which
appears in this color area is double. As you turn
the focusing lever you will note the double image
will become one and then double agaln. When your
subject becomes one in this color area. you are
properly focused.
Out of focus In focus
www.orphancameras.comView original page 15Page 16 · Read text
As you look through the single window O Thls Should be \Dcpth of Eleld'l
range-view finder you will n()te a white
bright f rame near the outer edge. The
Take a glance at the depth of field scale when a actual picture you take will be insiCe this
frame. Make sure your picture is composed you have focused on your subject. The indicat-
inside the bright frame. ing line in the center of the scale shows the
When taking a close-up picture, because of camera to-ob ject distance. Then read the F
parallax ( the difference between what the stop lines for the F stop you are using on each
viewfinder ' sees ' and what the lens ' sees,') side of the indicating line and they will show
you have to compose your picture inside of you on the distance scale, the distance in front
the line. and behind your object which is also in sharp
focus. The 12.8-Jindicates that you can get sharp
pictures in the distance which is shown or
formed by \2.8).
I
, ' t
l 5
Itl r .tView original page 16Page 18 · Read text
There are basically two ways to hold your A5 while taking pictures: Vertical and horizontal. As long as you
anchor the camera to your forehead and squeeze the trigger, not jerk it, you can use wlichever grip or format is
a most comfortable for you. It's always a good idea to brace your camera if you can. Even when you are shoot-
ing at faster than l/30 of a second where ybu can safely handhold a camera, make use of any available support.
It is advisable that you use a tripod when you shoot with the shutter speed less than 1/30 of a sec. At such
slow speeds there is almost always some camera movement while the shutter is open which blurrs your picture.
l 7View original page 18Page 19 · Read text
_ r- After you have taken
your last picture, the
film exposure counter A5 will point to 20 or 36
depending on whether
you are using a 20 or
36 exposure roll.
$lreto
rninof lcr
I)epress the rewind release button. Keep depress- Lift the crank on the rewind knob and turn crank
ing it until you have completely rewound the film. clockwise until you feel all resistance gone and it turns freely. Open the camera back and take the
filnr magazine out the camera.
l 8 Open the camera backwww.orphancameras.comand take the film magazine out the camera.View original page 19Page 20 · Read text
Using the self-timer, you can take your own
picture. First push the self-timer lever toward
the V mark, and you will be able to delay the
shutter operation approxirnately 9 seconds from
the time you press the shutter release to the
time the shutter is tripped. You can also
arrange the length of delay according to the
position that you position the lever.
l 9View original page 20Page 21 · Read text
Your Minolta A5 is internally synchronized for use
with electronic flash and flash bulbs.
1 . For Class M (foil filled) flash bulbs, slide the selector to
the "M". For electronic flash, slide the selector to the "X".
2. Insert a Minolta BC flash gun or electronic flash unit in
the accessory shoe.
3. Insert the plug of the flash gun's cord in the terminal.
SPTtPER crrrzru-I
20 www.orphancameras.comView original page 21Page 22 · Read text
Accessorieq Mlnolto B.C. Flqsh Extremely contpact, pocket size unit with collapsi. llle aluminum reflector, Folds neatly into a small vinyl zippered case for easy portability. Also features a BC capacitator that stores energy to greatly extend the life of your batteries. Works on regular flash light batteries. Mlnoltcl Lens Shqde This is a particularly usef ul device to prevent extraneous light f rom entering the lens during exposure. This extraneous light from the sun or flash bulbs can cause glare spots or "light flare" and ruin your picture. Mlnoltq Filrers Filters are used to control color and haze to make sure you get the picture you actually see outdoor color film to indoor use. Yellow Filter : Increases outdoor scenes contrast. Renders "blues" slightly darker-brings out blue- skies, water. clouds. Other Filter z lTaze filter for l,razecut. Mlnolrcr Mlnl 35 For color slide projection (35 mnl, 16 mm)View original page 22
From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.