Photography reference
Minox guide — part 2 Product booklet
Product booklet for Minox guide — part 2. 31 pages in English. Read the original PDF, download or print a copy without registration.
31 pagesEnglish2.0 MB PDF
Loading your manual…Open PDF directly
Document details
- Brand
- Minox
- Model / document
- Minox guide — part 2
- Document type
- Product booklet
- Language
- English
- Pages
- 31
- File size
- 2.0 MB
- Category
- Photography reference
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 2 · Read text
ffi,,
t
OTHERMINOX CAMERAATTACHMENTS
Minox Meqsuring Choin
This is supplied with the camera to protect the instrument
dropped, and serves as a measure forKf& against being accidentally
short distances.
To attach the chain to the eamera, insert the rectangular plug
at the end of the chain into the corresponding chain'socket on the
camera. This socket is normally covered by u spring loaded dust
cover but will retract into the camera body on pushing the chain'
plug into position.
To fix the chain plug, use the D-shaped ring attached to it in
the manner of a screw driver. Inserting it into the slot of the plug
disc, press against the camera chain socket and give the plug a quar'
ter turn to the right, when it will be securely fitted to the camera'
The chain is fitted with beads at distances corresponding ex'
actly to the shortest distances engraved on the distance scale of
the camera. With the chain fixed to the camera and held taut the
first bead (indicating the shortest extension) equals B inches, the
secondbead 10 inches, the third one 12 inches and the last one IB
inches.The full length of the chain is 2 feet.
Minox Tripod Heqd
This is a camera cradle with a clamping arm, which carries
the cable release thread and has at its end a tripod socket. It is
therefore required when using a cable releaseor if the camera is to
be mounted on a triPod.
To fix the camera to the tripod head make sure that the rec'
tangular locking lug on the bottom of the clamp is parallel to the
lorrt", dimension of the base. Otherwise, turn the knurled knob
until the lug is lined up (see page 67) -
To insert the camera, swing the clamping arm down, towards
the tripod socket. Slide the camera-with the chain removed-into
65View original page 2Page 3 · Read text
the clamp jaws so that all eontrols of the camera face towards the
hinge of the clamping arm. Gently press the camera down on to the u in
locking lug and turn the knurled locking knob to the right through
one quarter turn. This locks the camera to the base. Now swing the
clamping arm up. This will Iock the jaws of the clamp and place
the cable release socket over the shutter release button of the cam-
era when the camera is in the open picture-taking position. Insert
the cable release into its socket.
After each exposure close and open the camera in the usual
manner. The camera need not be removed from the tripod head
for this operation
Minox Pocket Tripod
When closed, the pocket tripod is not much larger than a
pencil, but steady enough to support even much heavier cameras
than the Minox.
It has a built-in ball-and-sockethead. When not in use the legs
are fitted into each other and the hollow center of the innermost
leg housesthe Minox cable release.
To set up the tripod, unscrew the two small ribbed sections at
the lower end of the tripod. Screw the sections into the threads oI
the tripod top. To get out the cable release unscrew the small
knurled disc from the thinnest section and pull it out.
The swivel top mav be securely locked in any position by turn-
ing the largeo fullr ribbed section of the tripod. For extra firm
locking, the section may be turned by inserting a coin in the slit of
the section,using the coin for leverage.
The Minox pocket tripod may be used on any flat surface, or
braced against a wall, tree, fence, etc. It may also be held against
the shoulder for convenient support of the camera.
TVheneverlight conditions call for shutter speedsoI l/20 second
or longer, th" Minox tripod will assure a steady camera hold and
sharp pictures.
The Minox pocket tripod, together with the Minox tripod head,
66
www.orphancameras.comView original page 3Page 4 · Read text
lltNox AccEs3oilE3
Cobb rcloor rockol.
Clomping orm.
Clcmping icwr.
Knurlcd locking nut.
Tripod rockot.
@Eg
Thc Minox lripod hcod ir o comcro crodb
with clomping orm which corrict thc cqbb
rctrorc rockct ond hor ot itr ond o tripod
burh. Mokc rurc thol rhr locking lug on tho
clomp boilom ic horizonlol bcforc inrcrting
comero (obovc fightli lurn lhc knurlod lock-
ing nul if rhc lcnr ir in rhc wrong porition
(obove center).
Righr: fhc llinox pockcl tripod hor c
builr-in bqll-ond-rockcr heod. Whcn not in
uro, thc lcgr orc ftrtcd inro coch othcr qnd
thc hollow inncrmorl ccnlor hourcr thc cqblc
rcfcorc. For dght: Pockct tripod qr toblo tri-
pod (top), ot tupporl on your chcrt (ccnlcr),
rtrqdird on o woll (boffon).
lcfr: Thc Minox dght
onglc flndcr ir ploccd
wirh irr mirror ol 45
vicw- iii:i''iiii:i.i.ii.riiiii.:i.'iiiiiiiiii:ii'i.ii.i:.idcgrccr to thr
ftndcr ovcr lhr ond of
thc comero. Cenlcr: Tho
Alinox rcfirx findrr,
purhod ovcr lhr findor
rnd of rho coma?o,
rhowr q clccr imogo ot
woirt lovcl for phcte
grophing childrrn, rtc
lr door nol fif fio
mcdrl ! ilinox.
67View original page 4Page 5 · Read text
may be conveniently carried in the pocket in a slim leather sheath
case availahle as an accessory.
Minox Reflex Finder
This shows a brilliant, clearly defined image and is intended
for use at waist-level, particularly for photographing children,
low subjects, etc. It may also be used as a right-angle finder for
upright pictures, but in this position it is suitable only if reason-
ably fast shutter speedsare used (of l/100 second or faster) as the
camera has to be held in the outstretched hand. where the risk of
camera shake is much greater.
The reflex finder is simply pushed over the finder end of the
Minox camera.
Minox Right-Angle Finder
This finder permits taking snapshots at right angles to the
viewing position, for unobserved working. As you photograph, so
to speak, round the corner, the subject remains unaware of the
attention it receives.
The right-angle finder consists of a right-angle mirror in a
light-metal cap which fits over the finder end of the camera. It
places the mirror at 45 degrees to the viewfinder opening. on
looking into the mirror you can observe the subject reversed,
left-to-right. The camera lens points at the subject but the photog-
rapher faces at right angles to it.
Minox Belt Cqse
To be prepared for picture-taking any time of the d"y or
night and under qny lighting condition, carry your Minox and a
flashgun in the convenient leather belt case.
For the Minox III S and Minox B, cases are available in
brown, black or red leather.
A special case is available for carrying Minox B and Model
U n/C Flash.
68
www.orphancameras.comView original page 5Page 6 · Read text
DEVEIOPINGAND ENTARGING
Many Minox users will be quite h"ppy to get their negatives
developed and enlarged by a photographic dealer who specializes
in Minox service. The manufacturers of the Minox, however, have
also made a special developing tank for processing Minox nega.
tives, and an enlarger designedto give the maximum picture qual-
ity for Minox negatives, as no ordinary enlarger could.
The Minox Developing Tqnk
'
The tank is a daylight loading model and requires no dark-
room. Films may be inserted and completely developed in full
daylight. A thermometer to check the temperature of processing
rolutions is supplied with the tank.
While the process of development is an extensive subject
dealt with in standard textbooks, the following instructions for
handling the developing tank, together with the set of processing
ehemicals supplied for the Minox, will allow even the novice to
develophis Minox film correctly.
Using fhe Minox Developing Tonk
Before using the tank, make sure it is perfectly dry. The tank
consists of a body, and a drum with a spiral film groove, which
screws in and out of the lid. The drum is connected to the lid
(which also has a cassette holder on its underside), but both
can be lifted off from the body before or after screwing out the
film drum by turning clock-wise.
l. Pull out film leader.
2. Insert cassettein top part and attach film leader.
3. Assembly tank.
4. Screw back drum.
5. Pour developerin slowly.
6. Agitate with thermometer.View original page 6Page 7 · Read text
7. Pour developer o,rt.
8. Rinse and fix.
9. Wash.
10. Unload film.
ll. Hang up to rlry.
12. Cut up and file.
t. The cassette consists of two chambers: the feed chamber
which is plain on both sides, and the take-up chamber which
carries a round hole (to engage the transport shaft of the
camera). Pull the film end out of the t'eed charnber (not the
take'up rhamber). This end has a punched hole and a smaller
slot lea<iingaway from it.
Turn the top part of the tank upside down (with the drum
screwed out). Place the cassettein position between the hold-
ing lug and the drum, push the film end under the spring, and
button it to the screw. screw the drum in slightly so that the
screw properly engages the film slot, with the film lying flat
and smooth in the groove.
3. Place the tank body over the top part, taking care that the
parts fit together properly.
q. Invert the tank, and turn the drum counter-clockwiseto screw
it back into the tank. The end position is reached when the
spring'loaded hook on the lid engages and stops the t6p
end of the drum.
slowly pour 2 ounces (53 c.cm.) of deveroper (preferably
filter first) through the central opening of the tank. The
liquid should be visible in the wide part of the opening.
Gently tap the tank on the table to disrodge air bells.
Place the thermometer in the central opening and slowly
move it up and down to make the developer circulate. checl
and maintain the recommended developer temperature.
After the required time, pour the developer out. Hold the
top of the tank in place with one finger to prevent it from
sliding out of the tank.
70
www.orphancameras.comView original page 7Page 8 · Read text
b. f ill and empty the tank two or three times with clean water
(at the same temperature as the developer) and pour the
fixing solution in (also at the same temperature). l,eave for
15-20 minutes, then pour out and fill the tank with water
again.
9. Put the tank under the tap so that a thin stream of water
(preferably filtered) runs down the central opening. Wash
in this way for 20-30 minutes (at developer temperature).
10. Remove the top of the tank with the drum from the tank. Hold
the top part in the left hand, with the drum horizontal, and
turn the drum clockwise. The film winds itself off in a loop.
11. Pin the film leader to a convenient shelf, and let the whole
film hang down, with the empty cassette acting as a weight
at the other end. Dry in a dust-free room and leave as un-
disturbed as possible. Use of a final rinse in a wetting
agent-solution minimizes the risk of water marks and un.
even drying.
L2. Cut the film up into strips of l0 negatives and file in the
negative envelope.
Developing 36-ExposureFilms in the Minox Tqnk
The Minox Developing Tank is designed to take the longesl
available Minox films, i.e. 50 exposures. The instructions supplied
with the tank apply to fullSO-exposureloads.
The following instructions apply only to 36-exposure films:
When inserting 36-exposure films into the tank, the spiral
drum will meet resistance after it has been turned about
three-quarters into the tank. This indicates that the film has
been fully withdrawn from the film cartridge, the film end
' remains anchored to the cartridge. Do not turn the drum any
further into the tank.
36-exposurefilms require 2 ounces of all solutions, since the
spiral drum, being only partly inserted, does not displace as
much liquid as when fully turned in.
7lView original page 8Page 9 · Read text
l,llNOX FltYl PROCES3INO
Dctcription opporitc
72
www.orphancameras.comView original page 9Page 10 · Read text
fiitNox flul PRocEtSn{o
Thc Minox dcvcloping tonk con bc loodcd
ond tho film developed in doylighr; no dort<-
room it requircd. Thc rcquence of opcrotionr ir
cr followr.
Opposite ,op row: Pull out film lcodcr from
rho colid chombcr of rhc cqsrerc (lcft); plocc
corcltc belwcen holding lug ond drum, purh
film ond under thc prong ond bufon ir to thc
rcrcw (cenler); ploce fhe tonk drum ovcr lhc
rupporl, cnrurc corrccl fit, ond scrcw il counlcr-
clockwisc inlo lhc ronk (right).
, Oppositc middle row: Stop whcn the tpring
loodcd hook cngogci on the lid (lefr); pour
rlowfy 2 oz. developcr into tonk (cenfer); in-
tcrt lhcrmomofcr inlo centrol opcning, moving
ir :lowly up ond down lo ogitote rhe developci
(right).
Opposite botrom row.. Aftcr dcveloping pour
dcvclopcr out whilc holding top po?t of tqnk in
plqcc (lefi); rinse tonk with wqter two or three
limcr, lhen pour in fixcr (center); ofter ftxing
wosh, in running woter (right). Weiling ogenl
rnoy bc u:cd in ftnol rinsc. .F
Top right: Removc drum qnd top port of
tonk. Whilc holding tho top port turn drum
clockwire horirontolly, whereby film will wind
itrelf off.
-Centq rigfrt: Suspand film for drying in c
plocc frec from dust. HH Cut%thc film up in-
to 5 strips of l0 pic.
luras ond inscrl into
ncaotive envelopc"
First cut off fhc empty
cossettc, thcn thc ftrst
slrip of l0 negotivct
which qrc inrcrlcd
emuhion tide down
ond with picturc No.
I in fron?. Follow
wirh thc othcr stripr,
73View original page 10Page 11 · Read text
I
After use, remove the drum of the tank from the top part.
Thoroughly clean and dry all parts of the tank; do not re'assemble
until completely dry.
Caution: Alter the d,rum has been turned, into the tank, it must
not be turned back. Otherwise the litm may become disengaged
lrom the d,rum and causescratcheson the emulsion.
Minox Negotive EnveloPe
As it is absolutely essential that the Minox negatives are not
touched by hand or open to dust, dirt, etc., a special negative
envelope has been designed. It consists of a stifi transparent
plastic envelope to accept 5 strips each of l0 negatives. You can
therefore file a complete film on one sheet. The strips between
the,negatives are numbered from 1 to 50, so that each negative
can be clearly identified
This SQ-frame transparent envelope is supplied in a card-
board cover with space for full data for each negative. After
processing, each Minox film should immediately be cut up into
strips of ten frames and placed into the negative envelope. Other'
wise scratches,marks, etc., are simply unavoidable. The best way
of doing that is to start by cutting off the empty cassette at the
first frame. Then cut ofi the first ten frames and slide the strip
+mulsion side down and with No. I leading-into the first sec'
tion of the negative envelope. Proceed with succeeding strips in
the same way. All the negatives are then in their correct order,
and correctly orientated.
Minox Film Viewing Mognifier
This shows the negative at approximately the same apparent
size as a standard 3Vz X 4V2 inches enlargement at normal
viewing distance. The viewing magnifier is pushed over the trans'
parent negative envelope (see above) so that the negative does
not need to be removed from the envelope for inspection.
The negative is framed by a metal mask in the magnifier
holder to prevent distracting side-light. A cut'out in the frame
shows also the number of the negative being examined.
74
www.orphancameras.comView original page 11Page 12 · Read text
The magnifier may be removed from its frame to be used for
other purpoEes or to be inserted into the frame of the trans.
parency viewer and cutter (page 29).
Minor Devcloping Ghcmicalr Kit
A special set of chemicals is available for the development of
Minox films. It consists of 15 bags of each of the two deu"loper
components required, 15 bags of fixer and 15 bags of wetting
agent. The bags are of thermoplastic foil and air-tijht well as
water'proof. Each developer set makes z ounces (s3 ",c.cm.) of
solution, that ie the correct amount required for the Minor tanlc.
The developer its€lf is a fine grain developer, producing _
almost grainlese results, without requiring extra exposure.
makg up the developer dissolve the contents of one bag of
developer eubstance A completely in about I ounce (30 c.cm.)- of
water at not more than 100 F. Add part B slowly under constant
€tirring. when everything is dissolved completely, fill up to 2
ounces (53 c.cm.).
The development time for slow films is l0 minutes, for medium
speed and fast films 14 rninutes, always at 65.6?. F. Keep to this
temperature.
Prepare the fixer by dissolving the contents of a bag of fixing
salt, which you will find in the lower part of the packirrg, in i
ounces (53 c.cm.) of water.
'This developer is unsuitable for the copying film, for which
the conventional contrasty developers should be employed.
To prevent streaks and drying spots it is advisable to soak the
film after the final wash for l-2 minutes in a wetting agent. To
make up this bath dissolve the contents of the bag marked .,wet-
ting agent" in I quart of water.
Enlorging Minor Negotives
Enlargement of the negatives follows the procedure outlined
in any standard textbooks on the subject. Extra care is, however,
75View original page 12Page 13 · Read text
necessaryto deal with the small negatives and to avoid spots.
scratchesand other defects.
A special Minox enlarger has been designed for enlarging
Minox negativesto retain the highest possible definition by allow'
ing for the curvature given to the films in the camera. The liberal
dimensions adopted in conjunction with use of an inclined column
ensure vibration-free work and permit the lens'mount to be adjusted
with maximum accuracY.
The Minox Enlorger
The baseboard permits enlargementsup to l0 X 14 inches to
be made on it. For even bigger enlargements the image may be
projected horizontally onto a wall by using a surface-silvered
mirror. The baseboard is covered with a rubber top to avoid
unintentional movementof the masking frame.
The light source is a 6 volt 6 amp. filament lamp. It receives
its current via the transformer which is housed in the base of the
instrument. Before connecting the enlarger (to A.C. current supply
only) the line voltage should be checked. The instrument is prop'
erly set if one core of the cable coming from the switch is con'
nected to the clamping screw of the transformer corresponding
to the main voltage of the supply available. \
The lamp has a bayongt socket and is inserted in such a way
that the transverse filament within the bulb points downwards
towards the baseplate.
A dimming switch is built-in at the right of the foot of the
column. This can be set to bright or dimmed illumination. Use
bright light for focusing.
The lamphouse, together with the film stage and lens, is
adjustable in height on the column by pressing the height adjust-
ment lever inwards. The lamphouse can be opened by pressing
the button near the top rim on the back of the lower part of the
housing. To close it place the front hole over the corresponding
retaining pin, pull down the top towards the back, depressing the
button, and let the top click into place.
The lilrn gui.d,e keeps the negative in the correct position
during the enlarging process. It consists of two metal masks. To
76
www.orphancameras.comView original page 13Page 14 · Read text
obtain the best possible definition the masks are curved. To inter.
change the upper backing plateo lift the lever at the right of the
lens. In this position the pressure on the film is released and the
backing plate can be pulled out. To insert the backing plate push it
into position from the front.
To insert. and, align the negatiae strip the top backing plate
has to be in the lifted position to clear the film. After positioning
hold the film in place with both thumbs and index fingers, at the
same time using the middle finger of the right hand to press the
'(to lever down into its horizontal position. Lift the lever take
off back plate pressure) when moving the film to the next frame.
This is best done by holding it between the middle and fourth
fingers of the right hand.
'lowering The size ol enlnrgement is set by raising or the
lamphouse. Simply depress the lever on the sliding lamphouse
arm, and move the latter up or down. Release the lever when
the lamphouseis in the required position.
To locus thc lens rotate its lower knurled collar. The lens is
of highest optical quality, and is coated. In conjunction with
-the curved negative carrier it will yield perfect definition.
A red filter, sometimes used to position the enlarging paper
while the light is switched on, is available as an'extra. It is simply
clamped on to the rib of the tubular guide on the enlarger.
For cleaning, the lens can be detached and the lower film
guide mask removed by turning the upper knurled lens ring to
the left, thereby unlocking it.
The tilting lamphouse facilitates getting at the condenser or
the negative in order to clean them.
To clean the lamphouse, .open it as described above. The lens
should be cleaned only with a piece of fluffless well washed linen
wrapped round a matchstick, or special lens tissue. When ne-
inserting the lens take care that the cutouts on the rear lens
barrel engage the pin situated on the side of the film guide next
to the column.
A push-button switch in the cable switehes the enlarger lamp
on and ofi for exposing the print.
77View original page 14Page 16 · Read text
Hiding scratches in negatiaes. The optical system is designed
to ensure perfect definition over the entire negative area, but
is soft enough to hide slight negative defects.
To enlarge badly scratched or otherwise damaged negatives
without making these faults too pronounced a built-in opal glass
may be swung into place. The exposure time will be somewhat
increased and the contrast slightly lowered. This latter fact is an
advantage for contrasty negatives; for normal ones it can be
compensated for by using a slightly more contrasty paper.
Direct current. If only D.C. is available, the enlarger witl
operate via a series-resistance,which is available for various volt-
ages from 110 to 220 volts. No traneformer is required.
A special enlarging easel with interchangeable masks is avail-
able for use with the Minox enlarger. The frame accepts any of
the four masks corresponding to the usual sizes: 2t/2 X 3y2,
3y4 X 4y2 and 4 X 5 in. The masks can be inserted or changed
in a matter of a few seconds.
The frame is automatically fixed on the baseboard in any
required position.
Tronsporencies
Color films yield transparencies instead of negatives, and
these may be viewed in a suitable viewer or projected on a screen.
Color enlargements are available from local photofinishers,
or you may make these yourself on Anscochrome Printon or
Kodak EktachromePaper (Type R.).
Minox Trcnspcrency Viewer qnd Cutter
The strips of color transparencies (or black-and white) can,
of course, be viewed with the negative viewer and magnifier (p"g.
74), bat the transparencies have to be cut into single frames if
they are to be mounted into the Minox transparency frames to be
used in a projector.
For this reason a special viewer has been designed which
has in addition a built-in cutting template and knife. When the
transparency is correctly positioned in the magnifier, a slight pres-
sure with the thumb on the knife blade cuts the transparency out of
79View original page 16Page 17 · Read text
. P
the strip. It seemsneedlessto state that for viewing transparencies
they should remain in the negative envelope,while for cutting they
have to be removed. The iut transparency has the correct dimen'
sions for fitting into the Minox transparency frame (see below) '
The slip-in magnifier is the same as used for the negative
viewer and can therefore be used for both devices'
IMounting Trcnsporencies
Special 3 X 3 cm. transparency frames are available to mount
the Minox I X fI mm. transparenciesfor projection in the Minox
slide projector (seepage 83).
Mount the slides in a room free frorn flying dust'
The cover glassessupplied with the Minox slide frames have
been carefully cleaned before wrapping. They should therefore
remain in their original packing until needed and rernaining glasses
carefully rewrapped. In this way you can save the arduous work
of cleaning cover glasses.
For accurate and convenient cutting of the transparenciesthe
viewer and cutter (seepage 79) should be used.
To mount the transparency irlto the frame proceed as follows:
l. Place metal frame with index window on table with index
window away from you, the four (ott latest versions, two)
tongues facing uP.
2. Insert a paper tnask.
3. Insert one cover glass (hold at edges,rnly)
,1,. Insert a netal rnask with indented frarne facirrg up; position
mask for vertical or horizontaltransparency'
5. Place the transparency into the frame with the dull side up,
so that the picture is upside dowtr.
6. Insert the second cover glass.
t . Place the slotted metal fratne over the tongues of the lower
frame.
B. Bend the tongues towards the center of the frame with the
end of a pencil or similar tool; smooth the tongues flat.
9. Write the file or reference nunrber in the fihn window. iJ
For correct projection, the slide is placed in the projector
80
www.orphancameras.comView original page 17Page 18 · Read text
MAKING MINOX STIDES
Above: fhe Minox lrdn3Poroncy vicwer ond cul'
r", p"t-it. inspeclion of siripr of tolor ond block'
snd-whitc- lronsporenciel qnd hor o cutting tem'
;il" or,l lnit" built in' Slight pressurc on lhc
["-"if. ."tt lhe lronsporency oul of the rtrip'
fromer lronrporency cm' X 3 3 Right:-o"oilolleSpeciol I mm' 8 X I Minox' lhe mounl looro
i*tp"t"n.ics for proicction in- rhq lllinox pro'
il; ii" ordcr of orrcmbly of thc -fromc is: A
L"i".'"'lt"-" with four longue3 uP in front of you'
i:;;-;;per mosk, c rop w.iih cover sloss' D
1"""t -rt[ i.tol -o'L, indented frome up' E ploce
;;p;;:il (dutl ridc up, picturc upside down)
i"i"-ifr. fromc, F rop with rccond cover glosr' G fromc of lower tonguer tvcr fromc olocot"ti; tloilod only hcvc lorest frome: Thc in' ;Jnsr;,
;; ;";"i Jna rlotr inrlcod of four' os shown'
Sclow: fhe durt proof lronrPoro-nl Plortic box
h.iJ;-;d mountcd tronrporencier' An index cord'
plt",+d on toP Gqn bt ieod without opening the
box.
8lView original page 18Page 19 · Read text
rHE mtNox ?toJEctot
Righr: Thc itinox rlidc
proioclor rnodcl 30 it rhc
nort rqlirfying mconr of
rhowing color (ond block-
cnd-whirr) llinox ?ronr-
porcncicr.
?.=,
hfi: Thr lenr ir lcl in s focuring -mounl in front of rhc horizonlol 4idr ehongor. ccntq: -Thc fonrporcncy ir inrcrrid ro thot itr numbrr ir in rhr rop- or,a-lo1i
to thc bcct<. Righr; An odiurrncnr knob pcrmirr rihing ,p i, down io;iig;-rh. tcnran pictun.
_ lolt: rho hmp houro ir oprnrd on prordng rho blsck button bdow thr trnr.
crrtrr: lhr lomp odiulmcnt rcrow ollowr ro-ining -rcfo,rhr lornp. lugir, r'io-;;rtt;;
ccta p?ct clr tho inrtrumrnl frem durt ond ollowr rcry, lrcnrporl.
8'
www.orphancameras.comView original page 19Page 20 · Read text
slide changer with the inclex window on top and facing to
the rear of the Projector'
Removeany dust from the t;over glass with a camel'shair
brush; fingerprint. o, other smudgesmay be removed with a
chamois cloth, lens tissue or other lintless, solt material.
Minox transparency mounts are now available with metal
masks in the r0 x 14 mm. size to incorporate 16 mm. slides'
Minox TronsporencY Storoge Box
For convenient and dustproof storage of the mounted tratts'
parenciesa transparent plastic box has been designed to accept
50 Minox trar,rpar"rrci"r. An index card for full data of each
transparencyis providbd, which-if placed on top inside the box
-can be read from outside.
Minox Slide Proiector Model 3O
T h i s p r o j e c t o r h a s b e e n d e s i g n e d f o r t h e p r o j e c t i o n o f B X . l l
t\* mm. Minox transparencies.It is also suitable for other sub'mini'
ature transparenciesup to f5 X 15 mm'
I t h a s a c o a t e d l e n s , l 0 0 w a t t p r e { o c u s t y p e l a m p a n d a
sphericalcondenserto yield a sharp and bright image'
Always set up the projector first and switch it on a{terwards'
when the lamp is switched on, the projector must not be tilted
or shaken. When setting up the projector' make sure that air
has free accessto it from below'
The lens is focused by turning its milled mount until the
* picture on the screen is sharp' For cleaning purposes' th-" I,ens
-u, be turned counter.clockwiseas far aS it will go and then
pulled out towards the front. The lens tube, together with the
slide carrier, is also removable. Press it into the projector, and
after a turn to the left, pull it out towards the front.
The slide changer is of the push-through shuttle design' Draw
it out at one side as far as it will go, insert the transparencyframe
with the oval white numbered window at the top and facing the
back of the projector. The slide holder is then pushed to the other
side to its stop. The transparency will now be in the light beam r
83
gView original page 20Page 22 · Read text
When inserting the lamp it must be adjusted for even il'
lumination of the picture area. To do this, open the lid of the
lamphouse,place a piece of white cardboard about 12-15 inches
in front of the projector and, without inserting a transparency'
switch on the tight. Manipulate the adjusting screw behind the# interior black lamphouse in such a way that the bright square
field on the card becomes as evenly illurninated and as bright
as can be obtained.;&lm
A leather case in which the projector can be safely trans'
ported is supplied with the Minox Slide Projector 30. It also
protectsthe projector against dust.
- * .
The Minomot
projector dliif; The Minomat is the newest and brightest automatic
built exclusively for the projection of Minox glass-mountedslides'
This ultra'compact projector measuresgy4" X By2" X 6"'$ clear, brilliant pictures are projected by 35mm | 1.6 Minolux
projection lens, and fan-cooled150-wattlamp'
Small, light Remote Control Unit allows completely auto'
matic control of the Minomat at distances up to 32 feet (f6 ft'
cable and 16 ft. extensioncord).
Also available is wireless remote control unit. Master unit
has three push-buttons for slide changes and two-way focusing'
Remote control cord and wireless ultrasonic control can be
combined with automatic slide timer adjustable from 5'45 seconds.
Custom-fitted carry-all case, 15" X I0V2" X 63/+", accommo'
dates all Minomat accessories-power cord, remote control unit,
automatic timing device, intermediate plug and 3 slide rnagazines'
Minomat slide magazine holds 36 metal and glass Minox
slides in numbered slots. Minox 30mm X 30mm transparency
frames with B X fl mm masks for Minox pictures are currently **
available; 10 x 14 mm masks for projecting transparenciestakert
with other ultra-miniature cameras will also be available' Kfrt:i
{rf The Minomat projects slides three times larger than other
miniature projectors at the same projector'to'screen distances.
85View original page 22Page 23 · Read text
SUBJECTSIN FRONTOF THE MINOX
Animolr-Our Pets
We only need to watch t}em at play or in repose to get not one,
but a whole series of pictures. The camera is best pre-set for zone
focusing (p. 2B). A low viewpoint is essential, othelwise we shall
dqvarf our subject. To get close-up heads, it is best to pre-set the I.
Minox at a fixed distanee, attract the attention and expose just
as the head comes into range. In the Zoo animals behind bars {
and mesh netting can be photographed by putting the lens right
into the space between the bars or netting to avoid their appear.
ance in the picture. The permission and cooperation of. Zoo au.
thorities should of course be secured before placing a camera
between the bars of a cage. The chief problem will be the usually
distracting and ugly background. By choosing side lighting we
can eliminate background detail. At the same time the animal will L
receive satisfactory modeling and will "stand out" boldly. One
should rnake sure of generous exposure to secure good rendering L
of fur, skin or feathers. Normal speed material without a filter will
serve in most cases.
Architecture
The typical "picture-postcard" view can be bought but not
your own personal architectural discovery. So concentrate on de- :a-
tail. The Minox has to be held straight, otherwise everything will
appear distorted and toppling over. (Still, intentionally disiorted
views may be effective. For these you must go quite close to the
building and take it at a sharp angle from a low viewpoint.| If
you must get a lot into the picture, it is essential to stand well back
from the building. With all architecture direct front light is bound
to give a flato uninteresting photograph with little detail. Front.
side lighting is almost essential to liven up the subject. Extreme
side lighting may produce disturbingly strong shadows casting across
important lines and shapes. {
-.t
86
www.orphancameras.comView original page 23Related documents and language editions
From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.