Nikon Nikonon III Flash Adapter User manual

tikon
 Flash Unit Adapter for Nikonos III

 This adapter is specifically designed for fl;lsh
 photography above water with the amphi-
 bious Nikonos III camera. Attached to the
 synchro-socket at rr-,'e beqe of the N ikonos III.
 it adapts the camera into accepting synch
 cords for either bulb- or electronic-type flash
 u n its.
 How to attach the adapter: First, unscrew  Photo 1
 the protective cap covering the synchro-
 socket on the baseplate of the Nikonos III                        X
 using a coin or some such object. AIign the
 adapter's positioning groove with the white                             FP
 dot on the camera's baseplate (Photo 1), and
 insert. Then turn the grip ring of the adapter
 to secure the assemblv.
 How to use the adapter: The adapter has two  Photo 2
synch contact terminals-one for bulb flash
 units, marked "FP", and the other for elec-                          ('X" tronic flash units, marked     (Photo 2).
 First, mount the flash unit on the camera.
Then plug the synch cord into the terminal
 corresponding to the flash unit used. Your
Nikonos III is now ready for flash photo-.
 graphy (Photo 3).

                                Shutter Speed





 lmportant: This adapter cannot be used with other
 Nikonos cameras. Also, underwater photogra'phy  is
 not possible while the adapter is attached to the
 camera.
                               rokyo, Japan               Printed h Japan (75.8.C) &-3@  NIPFoN KoGAKU K.K.