ROKUNAR MD600Z User manual

Multi-Dedicated Flashwww.butkus.us
RoKUNARMDoooz



 INSTRUCTIONS


Dedicated for CANON, NIKON, PICOH
MtNOLTA. OLYMPUS and PENTAX CAMERAS

Venmo @mike-butkus-camera  Ph. 2083
PayPal Name  Lynn@butkus.org      www.PayPal.me/lynnbutkus

ATTACHMENT TO CAMERA (Fig. 3)
                                        The flash unit has a "Hot Shoe" base and can
                                            be attached directly to a camera having a flash
                                                 accessory "Hot Shoe" contact, which will
                                             hold the flash unit and provide the electrical
                                            connection between camera and  f lash when
                                              the locking nut is tightened.
                                  TCAUTION
                                   When mounting the flash unit on or detaching
                                           from the Camera always make sure the porarer  is
                                OFF or the Camera may be damaged




www.butkus.us

                                                  3

FLASH OPERATTON-READY TEST (Fig. S)
          1) Turn the power switch ,,ON,,.
            2) .After approx 5 to 10 seconds the ,,READy,,
                   light should light up, conf irming your
                                 f lash unit is charged in readiness for  f lash
              photography.
               fThe Test button, when depressed will fire
               the  f lash gun confirming that it  is
                 operational).
          3) When flash is no longer required always turn
             power switch "OFF".





Fis. 5
                               5

HOW TO USE THE WIDE ANGLE DIFFUSER
           {Wr )  (Fig. 7)
       A 28mm lens can be used when the diffuser  is
          mounted. Always set the angle indication
         window at "N" when using the
             diffuser.  lt is not possible to use a 28mm lens
             at other settings.
           Attaching to the flash unlt:
          1) Push the knob of the diffuser gently into the
                unit as indicated.
         2) Push and insert as shown in the illustration.
           Detaching the diffuser:
          Push the knob of the diffuser in the direction
            of the arrow and pull out, as indicated in diagram.



Fig.7
                               7

www.butkus.us
 APERTURES         AND DISTANCES                      FOR AUTO.      2) By sliding the bottom scale, set the switcn tc MATIC OPERATTON                             (Fig. 9)                                                        the focal length of camera lens (?3, 35, 50 The flash unit has two automatic operation                                                           or 85mm).  settangs         designated                 by                                  red                        the colors                                 and                                              blue.      3) Set switch (41 on the front of the flash body The shooting               distance                     depends                          on                                     the                               zoom                                                           to the red or blue position.  position of the flash head. The blue setting is for
                                                       Set the aperture of the camera to the corres-  shooting at distances of up to 20 feet (6 meters)     4l
  at f/4 ASA 100/DlN 21 at wide position. For           ponding F stop indicated by the blue or red
  longer distances, use the setting which allows            arrows on the guide table. lf  f lash photos are
 shooting up to 30 feet (9 meters) at f2.g (ASA          then taken within the indicated distance 100/DlN 21 at wide position).                           (corresponding to the red or blue lines above  {
                                                        the meters/feet  scale) correct exposures will When using the zoom head your automatic
 operating distances can be increased. For infor_         be obtained in almost every situation.                                            5) When using bounce at longer range it is often mation on this please see guide table p. 12).
                                                       worthwhile to check the exposure by firing
 Using the guide table:                                  the  f lash gun using the Test button,  if the  ,                                               "Auto                                                      Check" light glows the exposure will   By 1)         sliding               the                 top                        scale                                in the                               exposure table,                                                     be                                                                     correct.     set        the            scale                        position                 to                    the                               corresponding                                               to
    the ASA/DlN rating of the film in the camera.
a

NOTES ON AUTOMATIC OPERATION
 1) \l/hen shooting outdoors in day light, intense
    illumination may cause the computer and
    the auto check lamp to malfunction,  in
   such cases it may be advisable to use manual
    setting.
2) After the Ready Light glows always wait for
    a few seconds before making an exposure,
    as sometimes the flash gun may not be fullv
.   charged.





                                                                                                  1't

BOUNCEwww.butkus.usPHOTOGRAPHY (Fag. 121
The convenience of automatic operation can
be applied to photography which involves
"bouncing" the light off a ceiling or other
reflective suffaces to obtain soft illumination.
The flash head has variable positions from 0o to
90o with click stops at every 150.

DEDICATED INSTRUCTION
To set the Select switch (2) to the right position
to use with your camera:-
Position "S" for cameras without dedicated
 f u nction
Position "O" for Olympus cameras
Position "M " for Minolta cameras
Position "N/R" for Nikon cameras and Ricoh cameras
Position "C"  f or Canon cameras
Position "P" tor Pentax Cameras
When the Ready lamp goes "on", this dedicated
flash will automatically set the shutter speed
of camera to 1/60 second or "x" synchro
setting and have indicating signal inside camera's
viewf inder.



                                                       15