Rolleiflex Wide Angle User manual

Two - Page

Loading the camera:

Unlatch the camera back @) and swing open
Pull out the knob @ Insert the roll of film from
the right. Pull the paper leader under the
roller @, push into the slot of the empty
spool, and tighten with a three-quarter turn of
the crank. Close the camera back.

Turn the crank clockwise until it
locks, then turn back till it locks
{as when advancing the film subsequently)
The film counter now indicates exposure No. 1

Setting the Film Indicator:

Turn the key @ clockwise (to set the ASA or
DIN rating) and then anti-clockwise (to set the
film type)

Focus

Push up the focusing hood at the rear. Press
the key ® to swing up the magnifier. Turn the
knob @ to focus the finder image in the hood
for maximum sharpness.