Sears Tower Snappy 620 User manual

HOW TO LOAD THE CAMERA

                                                                                    Digitally signed by Mike Butkus
                                                               DN: cn=Mike Butkus, o, ou=Butkus.org,
                                                                              c=US     Mike Butkus  email=mike@butkus.org,Date: 2024.10.30 20:23:42                                                                                                              -04'00'
 l. Remove the front of Camera by gently
forcing the locking clip at bottom of Camera
downward. Hold back of Camera securely
with one hand and with other gently slide
front of Camera forward. Place back of Cam'
era down gently.
2. Place this roll of film in the lower portion
of the focal box opposite the winding knob.
This is easily done by fastening the spool
securely into the two pivots. Be sure that the
black side of the film is downward and the
roll is placed over the retainer spring. You
will see an empty spool on the opposite side
held securely by the winding knob. To be
absolutely sure, turn the winding knob sev-
eral .times to see that the empty spool turns
with the knob.
3. Thread the pointed end of the paper into
the large slot of the empty spool. Make'sure
the paper is centered on the empty spool in
order that it will wind evenly. Now give the
winding knob about one full turn     just                                         - a firmenough to bind the paper and assure
grip on the spool.
4. After Camera has been loaded, replace
back on camera.
  After position is set, press your f-orefinger
firmly oh the center of the locking clip which
will snap locking. edge into position. (Do not
press tip of locking edge as it will not snap
into position.)

www.butkus.us
         SOME EASY-TO.REMEMBER
           RUTES


 | . Hold the camera level and steady when snapping;
   the slightest movement will cause blurring.
2. Don't try to get too much into one picture. Be sure
   you see your subject in the view-finder before snap-
   ping the shutter, making sure everything you want
    to take is visible in the view-finder.
3. Load or unload film in the shade only.
4. Wind the film immediately after taking each pic-
    ture to avoid double exposure.
5. Have each roll of exposed film developed as soon
    after it is exposed as possible.
6. Do not ever attetnpt to clean the lenses with your
    fingers. Use onlv a dry, soft eloth or lens brush.
7. Stay 5 feet or more from your subject. If you get
   too close: /our picture will be fuzzy and indistinct.
   Before loading camera with film operate shutter
    lever several times to see that it is working proper-
    ly. This insures smoother operation of ca'mera.

TOWER CAMERA
                 One Year Guaranlee    WE GUARANTEEAthe TOWER Camera to be free from
        defects in material and workmanship for a period of one
       year from date of sale.
       Should this TOWER Camera prove defective during the
        guarantee period, return it with this certificate fully filled
         out, to the store from which it was purchased, and we will
        repair it free of charge.
       This guarantee does not cover damage to camera, lens
        equipment, or any part thereof  if dropped or caused by
        wear. accident or misuse.
       This guarantee is void if repairs are attempted by anyone
        other than our authorized Repair Department.
     We do not authorize any person or representative to make
       any other guarantee or to assume for us any liability in
        connection with the sale of TOWER Cameras other than
        those contained herein. Any agreements outside of or con'
         tradictory to the foregoing shall be void and of no effect.
       This guarantee covers only TOWER Cameras sold in the
       United States and Canada.

        Comerq Model No
       Comero Seriol No.


           Snlns. Rorsucx AND Co. ,c,i.ro SrMpsoNS Srens Lttutrro



PRINTED IN U.S,A.