Film cameras
Sunpak Interface Module instructions User manual
User manual for Sunpak Interface Module instructions. 6 pages in English. Read the original PDF, download or print a copy without registration.
6 pagesEnglish0.5 MB PDF
Loading your manual…Open PDF directly
Document details
- Brand
- Sunpak
- Model / document
- Sunpak Interface Module instructions
- Document type
- User manual
- Language
- English
- Pages
- 6
- File size
- 0.5 MB
- Category
- Film cameras
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 4 · Read text
www.orphancameras.com
FOROLYMPUSCAMERAS
oM-2 OM-2N oM-10 OM .lN
Mode & Shutter Speed Set the Mode Selector switch on the camera body to the 'Auto' position. Set the shutter speed to either
Dial Sotting (on the 1 /30 sec. or slower, then turn
A cameral it on.
Set Mode Mode Selector Switeh the Mode Selector Switch on the flash body to the '*' Set the Selector Switch on the flash body to one of U 'A' positions. flashl Setting (on the oosition. the desired T
Film Speed Setting o Set the ASA for the film in use on both camera and fiasn. Set the ASA for the film in use on both camera and flash.
M
A Aperture Setting Adjust the aperture to the lens' required F stop. Set the same aperture for the flash unit's F stop,
T Ready Indication in the Turn the flash on and, after a few seconds the 'ready'light Turn the flash on and, after a fewseconds the ready light
'ready'light is on: a red (LED) signal will appear in the viewfinder. Ic Viewf inder willNo Indicationglow: appears in When the flashes' will glow:
'X' speed automatically. soeed asset to 1 /30 sec. or o speed is set at 'X' speed. The shutter speed is set to Make sure that the shutter
P slower.
E lf the exposure needle reads at below 1/30 sec., the
R shutterexposurespeedneedleis thenpointsautomaticallyat above 1 /60,set theto 1shutter/30 sec.speedI f the
A will remain at the indicated speed, and the flash will nor
T function. To properly operate under this condition,
! adjust1 /30 sec.the aperture till the exposure needle reads below
o Tec Flash/Auto N V6rif ication Refer to the flash unit instruction manual. Refer to the flash unit instruction manual.
When used with otho. Refer to the flash unit instruction manual. Refer to the flash unit instruction manual. ordinary cameras
oM-2 lOrU-Zw oM-10 OM .lN
M i/bde & Shutter Spe€d Set the camera's Mode Slector Switch to 'Manual'. the Set the Mode Selector to
A Dial Setting (On the shutter soeed to 1 /30 sec. or slower. 'Auto'.
cameral
Mode Selector Swhch Set the Mode Selector Switch on the flash bodv to the 'M' Set the Mode Selector Switch on the flash body to the'M'Nuo Setting (on the flash) Dosition. oosition.
A P Film Speed Setting Refer to the 'Automatic Operation' instructions. Flefer to the 'Automatic Operation' instructions.L E
R Aperture Setting Adjust to the appropriate aperture. (Befer to the flash Adjust to the appropriate aperture. (Refer to the flash
A unit instruction manual) unit instruction manual)
T Charge Indication in the Turn the flash on and, after a few seconds, the'ready'light Turn the flash on and, after a few seconds, the'ready' light
No indication I When the flashes' 'ready' ight is on, a red (LEDlsignal will appear in the viewfinder. Io Viewf inder will glow: will glow:
N Make sure that the shutter speed is set to 1 /30 or slower. The shutter speed is set to'X' Make sure that the shutter
speed automatically. speed is set to 1/3O or siower.View original page 4Page 5 · Read text
www.orphancameras.com
FORMINOLTACAMERAS
xD-l1 xc-g I XG-7
Mode & Shutter Speed Dial Set the AE mode Selector Set the Shutter Speed Dial to any position other than 'B'
Setting (on the cameral (M.A.S.) and Shutter Speed
A Dial to any position other
U t h a n ' B ' .
Selector Switch T Mode tlash) Set the Mode Selector Switch on the flash to one of the desired 'A' oositions. (on the Setting o
M Film Speed S€tting Set the ASA for the film in use on both camera and flash.
A O Ready Indication in the Turn the flash on and the 'ready' light will glow after a few seconds. When the'ready' T P Viewf inder light glows the shutter speed is then adjusted to 'X' speed automatically and:
I E
C R the red {LED) at the top the red (LEDI at 1/60sec. will start to blink after the
A ofto bltheinkviewfinderafter the shutterwill star shutter release is pressed in half-way.
T release is pressed in half-
I way.
o Aperture Settir|g Set the same aperture for the flash unit's F stop. N
Test Flash/Auto Verif ication Refer to the flash unit instructions.
When used with other
ordinary cameras Refer to the flash unit instruction manual.
Shutter Mode & Speed Dial M O Follow the'automatic operation' instructions. (on Setting the camera) A P
N E Mode Selector Switch S€t the Mode Selector Switch on the flash to the 'M' position.
U R Setting {on the flashl
A A Film Speed Setting Follow the'automatic operation' instructions.
L T
Viewf inder Follow the'automatic operation' instructions. Io Charge Indication in the
N Set the Aperture Adlust to the appropriate aperture. {Refer to the flash unit instruction manual.}
' All specif ications subject to change without notice.View original page 5From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.