Film cameras
Toyoca 35mm camera User manual
User manual for Toyoca 35mm camera. 14 pages in English. Read the original PDF, download or print a copy without registration.
14 pagesEnglish3.8 MB PDF

Loading your manual…Open PDF directly
Document details
- Brand
- Toyoca
- Model / document
- Toyoca 35mm camera
- Document type
- User manual
- Language
- English
- Pages
- 14
- File size
- 3.8 MB
- Category
- Film cameras
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 3 · Read text
-.{ffirl' www.butkus.us
TOYOCA 3 5
Body : light alloy-.diecast covered with black leather
lens : "0WLA" anastigmat
Fully hard coated
F: 3.5-45 mm
Shutter : 8., 1-1l300th of a second
Built in Self-Timer and European type
Flash Synchronizer equipped with F and X Terminal
Body Release Shutter
Focussing : Twin Lens Reflex
Picture : Takes 36 exposures of 24mmX 36mm size on standard
35mm roll filmView original page 3Page 7 · Read text
www.butkus.us
l. Magnifying Lens 15. Focussing Depth Scale
2. Accessary shoe 16. lens Aperture Direction
3. Shutter Release Button 1 7. Shutter Speed Dial
4. Film winding knob 1 8. Finder Lens
Film Exposure Gounter 19. IaKing lens - 5.
6. Protuberance for setting the 20. Flash Synchronizer Termina-
tilm Exposure Gounter 21. Self -Iimer Gharge Lever
7. Focussing Lever 22. Chamber for Gartridge
8. Shutter Cocking Lever 23. Film Cartridge
9. Lens Aperture Dial 24. sprocket Gear
1 0. Shutter Release Lever 25. Take-up Spool
1 1. Lens Aperture Lever 26. Film pressure plate
1 2. Finder Hood 27. magnttying lens lever
13. FiLm Rewinding knob 28. Back Lid lock
14. Eye-Level view Finder 29. Film Winding Adjust Xnob
'+
--View original page 7Page 8 · Read text
LOADING THE FILM
t. Open the Back Lid by pulling out the Back Lid
.Lock e8)
2. Insert the end of film into the Take-up Spool
while pulling out the Film
Rewinding Knob. (rs)
3. Put the Film car-
tridge into position. (fig.a)
4. Make steady clut-
ching of perforation on
both sides of the film
(fig 4)View original page 8Page 9 · Read text
www.butkus.us
to the sproket gear.
5. Turn the Film Rewinding Knob a little to stretch
the film. (fig. b)
6. Close the Back Lid.
T. Set the Film Winding Adjust Knob 1zs; to mark
"A" . ."
B. wind the Film
Winding Knod (4) until it
stops and press Shutter
Release Button. Repeat
the same procedure B
times.
(fie. 5)View original page 9Page 10 · Read text
9. Turn the Profuberance (6) on the Film Exposure
Counter (b) anti-clockwise and set the number (( I" to
arrow mark. (fig. 6)
*
(fig. 6)View original page 10Page 11 · Read text
www.butkus.us
TAKING THE PICTURE
. l. Lift the Finder Hood Q2)
2. Raise the magnifying Lens into required position
by lifting ihe Magnifying Lens Lever (27) .
3. Turn the Focussing Lever(7) upward or downward
'and determine the focus while looking at the image on
the glass screen.
4. Set the Shutter Speed Dial (tz) to the time
required and Lens Aperture Lever(11) to the required
aperture.View original page 11Page 12 · Read text
(8) 5. Charge the Shutter Cocking Lever
(3) . 6. Press gently the Shutter Release Button
first 7. Wind the Film Windlng Knod. Now the
piefure is taken
UNLOADING THE FILM
(fie .3) l. Set the Film Acljust Knob to "R".
2. Wind the Film Rewinding Knob.
3. Take out the cartridge.View original page 12Page 13 · Read text
www.butkus.us
REMARK
When the Shutter Release Button was pressed
without charging the Shutter Cocking Lever, press the
ShutterShutter Release Leuer (10) after charging the
caseCocking Lever without winding the film. ln
Releasedouble exposule is required, use the Shuiter
Lever as the same procedure.
HOW TO USE FLASH SYNCHRONIZER
Use the "F" Teminal 1zo; when ordinary FlashView original page 13Page 14 · Read text
Gun is used.
z. In case of elass F flash bulb is used all shutter .
speeds are synchronized and class "M" bulb is used :
i only the shutter speeds less than I l25th of a second
are available.
3. When Storobo Flash is used connect the socket
' to "X" terminal.View original page 14From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.