Film cameras
Welta Reflekta 6X6 User manual
User manual for Welta Reflekta 6X6. 7 pages in English. Read the original PDF, download or print a copy without registration.
7 pagesEnglish1.0 MB PDF

Loading your manual…Open PDF directly
Document details
- Brand
- Welta
- Model / document
- Welta Reflekta 6X6
- Document type
- User manual
- Language
- English
- Pages
- 7
- File size
- 1.0 MB
- Category
- Film cameras
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 6 · Read text
www.orphancameras.com
The perlbrmances 4 to 6 are repeated after each exposure, -,a Setting the distanee
which means 12 times with every film. After the twelfth
To set the distance, push the lever (8, fig. 1) along the
exposure, advance the film transport knob (1) until the
distance scale, cheeking the sharpness of the picture on
film spool is completely rolled up and the proteeting
the ground glass in the light hood. Distances can be set
paper is no longer to be seen in the film window.
between 4ft. (L.2 meters) and infinity. The coupling of the
two lenses guarantees absolute sharpness of the pieture.
7. Removiog the film
The opening of the camera track has already been des- 3. Setting the shutter speeds
cribed in point l. After the camera back has been opened, The Blitz I shutter gives instantaneous exposures from
pull the film transport knob out and give it a short Ll25 th to li 100 th second and time exposures of any
baekward turn, and the upper spool bearer (tZ, fig. 3) desired. length (B).
with the exposed spool can be swung out. Remove the
exposed film carefully and paste down the gumstrip.
Take the empty spool from the Iower spool bearer and
immediately put it into the upper spool bearer so that
it will be ready to receive a new film. In this way the
camera will ne\rer be without an empty spool.
F i g . 5
El. Technique oJ' Exposure
Instantaneous exposures: Turn the milled ring (R, Iig. 5) l. Opening and elosing the light hood
until the (K) mark etands above the desired number.
Push the light hood latch (2; fig. 2') to the left, and The exposure is made by light pressure on the shutter
the light hood will spring up. To close the light hood, release (7, fig l).
press the cover backwards, and the rear flap will auto. Time exposures: Turn the milled ring (R) until the (K)
matically fold in. The light hood then eloses with an mark stande above the B. The shutter opens on pressure
audible click of the latch. of the release and remains open until the preesure is
BView original page 6Page 7 · Read text
www.orphancameras.com
relaxed after any desired length of time. It is advisable 6. Flash contact pin
to use a tripod for time exposures. A tripod socket is
The Reflekta is fitted with a contact pin for regular and
built into the bottom of the camera.
electronic flashes (6, fig. l). Synchronization takes place
at the full opening of the shutter.
4. Setting the diaphragm
The lens apertures between f/3.5 and f/16 can be set by
means of a movable lever (9, fig. l) on the lower part C. A f"* Hints for the Amateur of the objective.
Important! The emaller the diaphragm, the longer will 1. Advance the film immediately after each exposure.
have to be the exposure. The smaller the diaphragm, , Exposure time and diaphragm are closely connected.
the greater will be the depth of sharpness.
The more light is taken away by stopping down to f/8,
For example: \Mhen set at l0' (3 meters) at an aperture fi 1l or more, the longer will have to be the exposure time.
of f/3.5 the depth of sharpness reaches from B'7" to For inslance: If the shutter ie set at l/lO0th sec. with
ll'6" (2.6 to 3.5 meters). At f/S it will reach from 7'5" to an aperture of f/5.6, it will have to be 1/50th at f/B or
L4' 9" (Z.ZS to 4.5 meters). Compare the chart (11, fig. 2) Il25th at f/ll. These examples can be extended in any
on the back of the camera. directiono only the depth of sharpness of the picture
will change.
5. Releasing the shutter
3. The advantage of the emall aperture (fl&,fllI, f/16) is
As already described in point 3 (setting the shutter a greater depth of sharpness. This means that the fore-
speeds), the shutter is ieleased by pressing down the ground and background will be sharp. The advantage
release (7,fre.1). This is donemost practically with the of the larger aperture: shorter exposure and less danger
thumb of the right hand while the camera rests firmly of uneteadiness. For action shots short speed.sare indis-
in the right and left hands. In this way it ie protected
-t.l pensableo necessitatingo of course, a larger aperture.
against unsteadiness.
In order to avoid blank exposures, the shutter release
must be pressed down as far as it will go when making
the exposure.
l 0 l t
I
I
i - .View original page 7From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.