Film cameras
Chinon CP-5 User manual
User manual for Chinon CP-5. 32 pages in English. Read the original PDF, download or print a copy without registration.
32 pagesEnglish2.4 MB PDF
Loading your manual…Open PDF directly
Document details
- Brand
- Chinon
- Model / document
- Chinon CP-5
- Document type
- User manual
- Language
- English
- Pages
- 32
- File size
- 2.4 MB
- Category
- Film cameras
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 2 · Read text
INTRODUCTION
Welcome to the exciting world of CHINON photography! Your Chinon CP-5 camera is the most sophisticated 35mm SLR
available from CHINON. The CP-5 is the world's first two-stage programmed AE camera aperture priority AE and full
manual control. The two-stage programmed AE allows you to shoot fast moving or slow moving subjects to allow
maximum versatility with your creative photographic needs. Employing a full information electronic viewfinder with variable
intensity LED's, the CP-5 program camera is extremely easy to operate even under the most adverse lighting conditions.
Your CP-5 program camera is designed with built-in electronic auto focus contacts that will permit automatic AF operation
when used with the optional Chinon 35-70mm AF lens. Total unmanned automatic operation is also possible when
further used with the optional Chinon power winders and wireless remote control unit.
TABLE OF CONTENTS
Nomenclature ..... 4
For Advanced Use:
Specifications ..... 8
I. Two-stage programmed AE ..... 48
Shoulder strap instructions ..... 16
II. Taking pictures in A mode ..... 52
Lens mounting ..... 16
III. Taking a picture in M mode ..... 56
Battery installation ..... 18
IV. Exposure memory : ..... 62
Battery testing ..... 20
V. Exposure compensation ..... 66
Film loading ..... 22
Vl. Time exposure ..... 68
Frame counter ..... 26
Vll. Multiple exposure ..... 70
Film advancement ..... 26
VlIl. Depth of field ..... 72
ISO/ASA setting ..... 28
System Operation:
Basic Operations:
I. Direct focusing system ..... 74
I. Focusing ..... 30
II. Remote control system ..... 78
II. Programmed AE (Auto-Exposure) mode
..... 32 III. Data back system ..... 78
III. Shutter release and release lock ..... 36 IV. Auto winder system ..... 80
IV. Unloading exposed film ..... 38 V. Flash system ..... 82
V. Self-timer/Audible signal on-off switch ..... Vl. Multi-sound system ..... 84
40
Optional Accessories ..... 88
Vl. Flash photography ..... 44View original page 2Page 3 · Read text
NOMENCLATURE
1. Manual shutter speed select button
8. Self timer LED
/Exposure memory button
9. Shoulder strap eyelet
2. Program mode selector
10. AF electronic contacts
3. Shutter release button
11. Self timer / Audible signal on-off switch
4. Exposure mode select dial
12. Power grip attachment screw
5. Film advance lever 4.butkus.org
13. Lens lock release lever
6. Film counter window
14. Power grip (battery compartment)
7. Multi exposure lever
15. Accessory shoe (hot shoe)
19. Aperture ring
16. Film rewind knob and back
20. Depth of field scale
opening knob
21. X-sync socket
17. Film speed dial (ISO/ASA)
22. Focusing ring
18. F-stop windowView original page 3Page 4 · Read text
23. Viewfinder eyepiece
31. Sprocket teeth
24. Metal focal plane shutter
32. Multi-slotted needle
25. Film chamber
33. Camera back
26. Film rail
34. Film pressure plate
27. Film guide rail
35. Power winder coupler
28. Power source contact
36. Auto Date electronic contacts
29. Power winder electronic contacts
37. Rewind button
30. Tripod socket
SPECIFICATIONS
Type: 35mm automatic compact SLR camera with TTL full aperture programmed AE (instant stop
down re-metering), Aperture priority AK, and manual exposure system.
Picture Format: 24 x 36 mm.
Lens Mount: Chinon universal bayonet mount with built-in active AF lens contacts.
Mirror: Quick return mirror.View original page 4Page 5 · Read text
Shutter: Electromagnetically controlled focal plane shutter, stepless speeds from 8 sec to 1/1000 sec on automatic; the maximum operation time at AE (A or P mode) is 30 seconds, 14 speeds from 8 to 1/ 1000. sec on manual exposure. Electronically controlled automatic and manual exposure. Shutter Release: Electromagnetic type shutter release with safety lock and provision for cable release. Viewfinder: Fixed eye level pentaprism (silver coated), central split image with micro prism collar, 18 LED's indicate shutter speeds (green), over/ under exposure (red), slow shutter speeds warning (yellow), flash ready (red), and program AE (green), Aperture visible in viewfinder Viewfinder Magnification: 0.87X ( @ 50mm, at infinity) Viewfinder visibility: 92%. Auto Focus Contacts: Built-in for AF lens, activated by shutter release. In-Focus Trigger: Shutter will not be released unless the optional AF lens is in focus. Exposure Meter: TTL center weighted full aperture system employing silicon blue cell. Exposure Range: EV +1 (F1.4, 1 sec.) to EV 19 (F22, 1/1000 sec.) at ASA 1 00/F1.4 Exposure Compensation: Built-in, +1 EV to -1 EV in 1 /3 EV increments. Memory Lock: Built-in exposure memory lock system. ASA Range: 25 - 3200 (DIN 15 - 36) with 1/3 EV segment. Programmed AE Mode: Two stages available: P1: The programmed AE designed for fast moving object. Lens aperture stays open up to the shutter speed of 1/60 sec. Between 1/60 - 1/1000 sec., the aperture varies in accordance with the programmed shutter speed. 4.butkus.org P2: The programmed AE designed for slow moving objects, depth-of-field well considered AE character. Lens aperture stays full open up to the shutter speed of 1/8 sec. At faster than 1/8 sec., the aperture varies in accordance with the programmed shutter speed. Programmed AE mode warning: Built-in with flashing "PROG" LED when the aperture is set within 4 stops from full aperture opening. Beyond 4 stops from full aperture opening, "PROG" LED will remain "ON" at program AE mode. Manual Shutter Speed selector: One-touch activation type by pressing the shutter release button halfway. Also serves as Exposure Memory button at A mode. Depressing the "M" button, shutter speed starts from 1/125 sec. and goes up with LED indication. Depressing both "M" button and shutter release button, shutter speed goes down from 1/125 sec. with LED indication in viewfinder. S.C.S. (shutter speed change signal): Built-in with audible buzzer signal along with manual shutter speed change.View original page 5
Page 6 · Read text
M.E.S. (manual exposure signal): Built-in with audible buzzer signal when the proper exposure is achieved by turning aperture ring. Camera Shake, over/under warning: Shutter speed slower than 1/30 see, under/over warning with double audible signal. Film Advance: Single stroke in an arc of 130 with 25 stand off. Motorized film advance with optional power winder. Film Loading: Multi-slotted needle type Film rewind: By depressing the rewind button and cranking the rewind lever. Film Counter: Automatically indicates number of exposure and resets to "S" when the camera back is opened. Multiple Exposure: Built-in switch which disengages film advance and film counter. Self timer: Electronically controlled at 10 sec. with flashing red LED and audible buzzer signal. "B" (Bulb) Timer Signal: Built-in with variable audible buzzer signals. Accessory Shoe: Hot Shoe type with "X" sync and a contact for Chinon dedicated flash. "X" synchronization: "X" flash sync at 1 /1 00 sec. Slow Synchronization: 1/60 sec. or slower at manual. Special Contact for Chinon Auto Date: Built-in. Power Source: Three 1.5V "AAA" (AM-4) 4www.butkus.org Power Hold System: 30 sec. at manual exposure mode. Battery Check: Built-in with LED indicator. Accessories: Chinon power winders, Dedicated flashes, Info Back-2 data imprinting unit, Auto Date data imprinting unit, Super multi-coated lenses, AF lenses, Deluxe carrying cases and many more. Dimensions: 136 (W) x 88 (H) x 51 (D) mm. (5.35" x 3.46" x 2.01") Weight: 5209 (18.34 oz)View original page 6
Page 7 · Read text
SHOULDER STRAP INSTRUCTIONS
Place the end of the shoulder strap
through the retaining ring connected
to the camera body lug. Fold the
shoulder strap over the retaining
ring. Place the ends of the strap
through the plastic retainer. Pull
tight to secure. Follow the same
procedure for the other side of the
camera (Fig. 1, 2).
LENS MOUNTING
Your CHINON CP-5 program is
equipped with a CHINON "K"
bayonet mount which accepts all
interchangeable lenses with the "K"
bayonet mount. To attach the lens,
match the red dot on the camera
body with the red dot on the lens
(Fig. 3).
Then insert the lens into the camera body and turn it clockwise until the lens locks with a click. To
remove the lens from the camera body, depress the lens lock release lever, turn the lens
counterclockwise as far as it will Do, and lift it up from the body (Fig. 4) 4.butkus.org
BATTERY INSTALLATION
1. Turn counterclockwise the screw
on the side of the power grip to
remove the power grip from the
camera body (Fig. 5).
2. Place three 1.5V "AAA" alkaline
bakeries (LR-03, AM-4) in the
power grip (Fig. 6).
3. Attach the power grip to the
camera body by turning the screw
clockwise to secure it.View original page 7Page 8 · Read text
NOTE:
1. Make sure that the batteries are inserted correctly, i.e., check polarity. The shutter will
operate only when batteries are correctly installed and not exhausted. When replacing
batteries, replace all three bakeries at the same time.
2. If you do not use your camera for a long period of time, remove the bakeries, and store in a
dry location. This will prevent the possibility of battery leakage and damage to your camera.
BATTERY TESTING
1. Set the "exposure mode select
dial" to the "P" position (Fig. 7).
2. Look through the viewfinder and
depress the shutter release button
halfway down to confirm at least
one of LED indicators in the
viewfinder illuminates (Fig. 8).
3. When nothing illuminates,
replace the batteries with a fresh set
or check to ensure the batteries are
correctly installed.
NOTE: Battery testing cannot be accomplished with the exposure mode select dial set at the "L" or
"B".
FILM LOADING
Pull up on the film rewind knob until
the camera back pops open (Fig. 9).
Then insert a film cartridge into the
film chamber with the protruding
end of the cartridge positioned to
the bottom of the camera. Push
down the film rewind knob and
slightly turn the knob in either
direction until it "seats" properly into
the film cartridge spool (Fig. 10).View original page 8Page 9 · Read text
Insert the trimmed end of the film
into a slot of the multi-slot needle
(Fig. 11). Turn the exposure mode
select dial to "M" or "X" setting and
advance the film while holding the
film lightly down on to the transport
sprockets.
Release the shutter if necessary and advance the film until the sprockets engage with the upper and
lower perforations of the film (Fig. 12). Then close the camera back firmly until it locks with a click.
Now turn the film rewind knob gently until all the slack is taken up and the rewind knob stops. 4.butkus.org
Do not force or further rewind the
film (Fig. 13) Advance the film and
release the shutter three times (Fig.
14). The rewind knob should rotate
counterclockwise as the film is
advanced and the "1 " marking
should appear in the frame counter
window (Fig. 15).
Turn the exposure mode select dial
to the desired position. A
convenient memo holder is provided
on the back of your camera.
Whenever you load new film, just
cut off the top of the film box and
put it in the memo holder as a
reminder (Fig. 16).View original page 9Page 10 · Read text
FRAME COUNTER
Your CHINON ,CP-5 program is equipped with a frame
counter which displays the number of exposures made and
resets automatically upon opening the camera back. At the
very beginning, the counter shows "S" indicating the start of
the picture taking process. When a film is loaded according
to the procedure previously described the counter displays
"1" indicating that the camera is ready for the first exposure.
Every time the film advance lever is turned, the counter will
proceed one stop forward. The number 24 and 36 are
colored in orange to warn the end of commonly used films
(Fig. 17)
FILM ADVANCEMENT
When the film end is reached, the film advance lever may stop before the lever is fully turned. Do not
force the lever. Stop winding at once and rewind the film. Refer to "UNLOADING EXPOSED FILM." 4.butkus.org
ISO/ASA SETTING
The film speed dial located on top of the camera is coupled
directly to the internal exposure control circuitry and the
correct exposure factor for the film is automatically set by
aligning the ISO/ASA number of the film you are using with
the index mark on the camera body (Fig. 18). The ISO/ASA
number of the film is printed on the film box or in the
instruction sheet packed with the film. Pull out the film speed
dial and turn the dial to align the appropriate ISO/ASA
number with the green index mark. Be sure to check the
ISO/ASA number whenever you put new film into the
camera.View original page 10Page 11 · Read text
BASIC OPERATIONS
I. Focusing
At the center of the viewfinder is the split image with
microprism collar which is then surrounded by ground
glass. When the camera is in focus, the image on these
focusing aids becomes sharpest. While observing the
subject through the viewfinder, turn the lens focus ring until
the upper and lower split images match up to form a
uniform image (Fig. 19).
This split image focusing is particularly helpful when the
subject is dominated by vertical lines. The microprism is
also very helpful; when out of focus; the image on the
microprism will be composed of a collection of asterisks
(Fig. 20). These sparkling asterisks will disappear when the
focus is properly set. You can double check the focus
seeing by the image on the ground glass.
You can also focus indirectly. Actually measure or estimate
the distance to the subject and set the lens focus ring to the
appropriate setting (Fig. 21).View original page 11Page 13 · Read text
Beyond four stops of full aperture opening, the "PROG" LED indicator will remain illuminated at the
programmed AE mode. Thus, set the lens aperture, so as not to cause the "Programmed AE mode
warning" LED to "flicker."
For more detailed usage of programmed AK, please refer to the section "P MODE" for advanced use.
III. Shutter release and release lock
Your CHINON CP-5 program camera features
a two stage electromagnetic shutter release
with safety lock. When the shutter release
button is depressed halfway, the electronic
circuitry starts functioning. When the button is
fully depressed, it will trigger the shutter.
Always hold the camera steady and gently
depress the shutter release button to make an
exposure. The position marked "L" on the
exposure mode select dial is the shutter
release safety lock position. When this is
aligned with the index mark, the batteries are
disconnected from the circuitry and an
exposure cannot be made (Fig. 25). This
position is also used when the camera is not to
be used for a long time.
IV. Unloading exposed film
When the film in the camera is
fully exposed, the film
advance lever will stop. Do
not attempt to force the lever
any further, but rewind the film
and replace with a new one.
Push in the rewind lock
release button at the bottom
of the camera (Fig. 26).
Unfold the rewind crank of the
rewind knob. Turn the rewind
crank clockwise (Fig. 27).
You will feel friction as the film is rewound from the camera, back into the film cartridge. Suddenly,
when the film is rewound completely, the friction decreases and the rewind crank will turn with ease.View original page 13Page 14 · Read text
Then pull up on the rewind knob to open the camera back
(Fig. 28). When the camera back is opened the frame
counter will automatically reset to "S". The rewind lock
release button on the bottom of the camera will pop out to
the normal position when the film advance lever is advanced
again. Your exposed film should be processed without delay.
V. Self-timer/Audible signal on-off switch
Your CHINON CP-5
program camera is
equipped with an electronic
self-timer with a red LED
indicator, together with a
piezo ceramic buzzer
(audible signal).
Thin self-timer switch also functions as an audible signal on-off switch. The built-in self-timer
electronically delays the shutter release for ten seconds. The camera should be mounted on a firm
support during self-timer operation. To activate the self-timer, place the self-timer switch to the upper
position and depress the shutter release button (Fig. 29, 30). You will notice the red self-timer LED
blinking with the piezo ceramic buzzer (audible signal) and two seconds before the shutter release
the flashing frequency will increase giving you or your audience time to smile. The self-timer may also
be utilized for releasing the shutter at low shutter speeds when a cable release is not available. If you
decided not to use the self-timer, you can cancel it even after it has started to operate. Just return the
self-timer switch to the normal position for cancellation.
NOTE: When utilizing the self-timer with the exposure mode select dial set at "P" or "A", it is
recommended to block the viewfinder with an eyepiece cover or similar item to prevent extraneous
light from interfering with the automatic exposure system of the camera (Fig. 31 ).View original page 14Page 16 · Read text
2. A few seconds after your CHINON
flash is turned to the "ON" position,
the flash ready light will illuminate.
When the flash has reached
adequate power, the camera's
shutter speed is automatically set to
the 1/100 sec., and 1/125 sec.
shutter speed indicator (green) will
blink, and the flash ready indicator
will glow (red), signaling the camera
flash is ready to operate (Fig. 35).
With the exposure mode select dial
set at "A", after the picture has been
taken and before the flash has
recycled, the camera will
automatically switch to the automatic
exposure mode until the flash has
once again recycled.
Other electronic flash units can
be utilized with your CHINON
CP-5 program
camera. However, if the unit
does not incorporate a built-in
hot shoe, a P.C. cord must be
connected to the "X"
synchronization terminal on
your CP-5 program camera for
proper flash
synchronization. Also the
exposure mode select dial
must be set to the "X" position
(Fig. 36). NOTE: It is
advisable to use only CHINON
dedicated flash units or units
designed specially for use on
CHINON cameras. NOTE:
When "FP" or "M" type flash
bulbs are used, the shutter
speed must be set to 1/15 sec.
or slower. Use of a tripod is
always recommended. For
details on "Slow
Synchronization", refer to
"SYSTEM OPERATION".View original page 16Page 17 · Read text
FOR ADVANCED USE:
I. Two-stage programmed AE
The CP-5 camera is designed with a two-stage
program, which gives you greater photographic
versatility: select either program based on your
photographic needs via the one touch lever (Fig.
37).
1. Program
P1 (Table A) The P1 mode minimizes
the camera shake and is designed to be
used when photographing "hi speed"
(moving) objects.View original page 17Page 18 · Read text
2. Program
P2 (Table B) The P2 mode
gives priority to the lens
aperture, which affects the depth
of field. This mode is convenient
when taking picture of hard-to-
focus objects and when using
wide angle lens.
3. Programmed AE mode warning and aperture setting.
(Table C) Unlike other program cameras,
CHINON CP-5 camera accepts any
existing "K" mount lenses even in the
program mode. Generally, you should set
the aperture at its minimum setting.
Although you can take a perfectly exposed
picture at any aperture setting, the
applicable programmed range is limited in
this connection, thus the program AE mode
warning LED is useful to check the lens
aperture setting for program mode. The
programmed AE mode warning "PROG"
LED will "flicker" when the lens aperture is
within four stops of the full opening
aperture. Set the aperture within the range
so that the warning LED will not "flicker".
Follow your own photographic needs;
however, in such a case for instance, using
50mm f1.4 lens with its f/stop set at 5.6, the
camera is controlled by the program
characteristics of f/1.4 through f/5.6,
beyond f/5.6, camera is controlled by the
aperture priority automatic exposure mode
(See table C).4.butkus.orgView original page 18Page 20 · Read text
* If the lens F stop or the aperture size is too large for the lighting condition, the red over exposure indicator (third from the top of the scale) will glow, giving double audible buzzer signals (Fig. 41). When this happens, stop down the lens diaphragm by turning the lens F stop ring or use a film with a lower ASA number. Another alternative is to use a ND (neutral density) filter in front of the lens. * If the displayed speed is 1/30 or slower (yellow LED's with audible signal), use of a tripod is recommended, or you can increase the shutter speed by opening the lens diaphragm. Use of a flash unit is also suggested. * If the computed shutter speed is even longer than 8 sec. (semi darkness condition) the under exposure indicator (red LED with double audible signal) at the bottom of the scale will light up (Fig. 42). Open the lens diaphragm by turning aperture ring, use a film with a higher ASA number or use a flash.View original page 20
Page 21 · Read text
III. Taking a picture in M mode
You can manually control the CHINON CP-5
when the camera is set to the "M" mode. Just
one push of the manual shutter speed select
button selects the desired shutter speed and the
audible signal will be heard when correct
exposure is obtained. Furthermore, CHINON
CP-5 program camera is equipped with
convenient "power-hold circuitry".
* Manual shutter speed select button
1. Set the exposure mode select dial to the "M"
mode position (Fig. 43).
2. When the shutter release button is depressed
halfway the 1/125 shutter speed LED will blink
and the metered shutter speed will be displayed
(Fig. 44).
3. Select the desired shutter speed by
depressing the shutter speed select button. The
shutter speed LED indicator increases step by
step as you press the button.
4. When you press both shutter release button
and manual shutter speed select button, the
shutter speed LED indicator decreases step by
step.
* There are two methods of selecting the
correct exposure (M mode)View original page 21Page 22 · Read text
1. In the Shutter priority AK: set the
required shutter speed. Rotate the lens
aperture ring until the selected shutter
speed and the metered speed are matched
up on the scale in the viewfinder (Fig.
45).
2. In the Aperture priority AK: Set the
required aperture on the lens. Change
shutter speed until both LED's are
coincident (Fig. 46).
* Other features at M mode
1. Power-hold circuitry: One push of the shutter release button holds the camera circuitry for
30 seconds.
2. S.C.S. (Shutter speed Change Signal): An audible signal will be heard when the manual
shutter speed changes. When the correct exposure (shutter speed) is obtained, a longer
audible signal is heard.
3. M.E.S. (Manual Exposure Signal): For the shutter speed preference (#1 above), an audible
signal is heard when the correct exposure aperture is obtained. 4.butkus.orgView original page 22Page 23 · Read text
NOTE: At "M" mode, the camera shake and over/under warning audible signals are not
operative.
IV. Exposure Memory
Under normal circumstances your CHINON CP-5 program camera will produce perfectly exposed
photographs, due to the integrated automatic exposure circuitry. However some lighting conditions
might occur that could misguide the system such as subjects with a very high contrast or strongly
back-lit scenes. In such cases the exposure memory feature should be used.
1. Make sure that the exposure mode
select dial is set to the "A" position (Fig.
47).
2. Depress the shutter release button half
way and measure the light on the main
part of the subject you want to shoot
excluding all unnecessary light from the
side or background (Fig. 48). Then press
the manual shutter speed select button
once which will instantly memorize the
light value of the subject giving an audible
signal (Fig. 49). Once the button is
depressed, there is no need to hold the
manual shutter speed select button further
as long as the shutter release button is
depressed halfway.View original page 23Page 24 · Read text
3. Focus and compose the subject in the viewfinder as you desire (Fig. 50). Then press the shutter release button all the way to take the photograph. The shutter speed indicator (LED) in the viewfinder will stay on signaling the "memorized" shutter speed once the manual shutter speed select button is depressed. 4. Exposure Compensation (at "P" or "A" mode)View original page 24
Related documents and language editions
From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.