Film cameras
Ricoh KR-10 Super User manual
User manual for Ricoh KR-10 Super. 25 pages in English. Read the original PDF, download or print a copy without registration.
25 pagesEnglish2.9 MB PDF
Loading your manual…Open PDF directly
Document details
- Brand
- Ricoh
- Model / document
- Ricoh KR-10 Super
- Document type
- User manual
- Language
- English
- Pages
- 25
- File size
- 2.9 MB
- Category
- Film cameras
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 2 · Read text
FOCUSING EXPOSURE ADJUSTMENT SYSTEM B (BULB) SETTING Shutter Lock FLASH PHOTOGRAPHY SELF-TIMER PHOTOGRAPHY INFRARED PHOTOGRAPHY SPECIAL ACCESSORIES PROPER CARE OF YOUR CAMERA SPECIFICATIONS NOMENCLATURE 1. Shutter Speed Index Line 2. Shutter Release Button 3. Shutter Speed Dial 4. Film Advance Lever 5. Exposure Counter 6. Strap Eyelet 7. Self-Timer Indicator Light 8. Exposure Indication Switch 9. Lens Release Lever 10. Lens Locator Mounting NodeView original page 2
Page 4 · Read text
21. Self-Timer Switch 30. Winder Contact 22. Exposure compensation Index Line 31. Film Rewind Release Button 23. Hot Shoe 32. Winder Coupler 24. Flash Ready Signal Contact 33. Winder Positioning Hole 25. Viewfinder Eyepiece 34. Film Pressure Plate 26. Film Rewind Shah 35. Back Cover 27. Film Chamber 36. ASA/DIN Conversion Table 28. Battery Compartment Cover 37. Film Take-up Spool 29. Tripod Socket 38. SprocketView original page 4
Page 5 · Read text
www.butkus.us
ATTACHING THE VIEWFINDER CAP AND STRAP
Viewfinder Cap For instructions on how to use the Viewfinder Cap, read the
section on Self-Timer Photography and Usage of the Viewfinder Cap. (Fig.1)
1. Slip the Viewfinder Cap on to the strap. (Fig.2) 4.butkus.org
2. Put the strap Eyelet and adjust it to the correct length. (Fig. 3)
CHANGING LENSES
To remove the lens from the camera
1. Keep the Lens Release Lever pressed in, and turn the lens in the
direction of the arrow.
(counterclockwise) (Fig. 4)View original page 5Page 6 · Read text
To mount the lens on the camera
1. Line up the red dot on the lens mount with the matching red dot on the camera body, or
alternatively, match the red ( dot ) mark on the Depth of Field Scale to the red dot on the camera
body. (Fig. 5)
2 When the lens has engaged, turn it in the direction of the arrow until it clicks into place. (clockwise)
(Fig. 6)
* For convenience when mounting the lens in the dark, you can line up the lens Locator Node
with the Lens Release Lever.
INSERTING THE BATTERIES
The exposure meter and shutter of this camera are powered by
batteries, so it is important to insert the batteries correctly for correct
operation.
1. Remove the Battery Compartment Cover by turning it
counterclockwise with a coin. (Fig. 7)
2. Place the two batteries on top of each other as shown in the
illustration in the battery holder of the Battery Compartment Cover.
(Fig. 8)4.butkus.org
Batteries to use:
Two LR-44 Alkaline batteries; life-span about 6 months under normal
use.
Two SR-44 Silver Oxide batteries; life-span about 12 months under
normal use. (Mallory MS76. Eveready S76 or equivalent)
* Since dirt or skin oils on the batteries may cause a bad contact, wipe the batteries clean with a dry
cloth before inserting them.
* When your camera is not used for a long period of time, remove the batteries.
Keep camera batteries out of the reach of babies and small children! If a battery is swallowed,
IMMEDIATELY contact a Doctor, as the battery material is harmful to the body !View original page 6Page 7 · Read text
www.butkus.us
* Generally, in cold conditions, the voltage of the batteries decreases and this will impair the
functioning of the shutter and exposure meter. In these cases, either warm up the batteries or keep a
spare set of batteries warm in your pocket ready to insert just before shooting.
* If no batteries are inserted, if they are incorrectly inserted, or if they are worn out, the camera will
not operate. If the camera will not operate, check that the batteries are installed correctly. If they are,
the batteries are probably dead. Replace them with new batteries.
* When the voltage of the batteries is getting low, the BAT (Battery Low Warning Signal) in the
Viewfinder will blink on and off. Please change the batteries without delay.
INSERTING THE FILM
(Always avoid direct sunlight when in setting the film.)
1. Pull up the Film Rewind Knob until the Back Cover snaps open.
(Fig. 9)
2. Insert the film in the Film Chamber and push the Film Rewind
Knob down to its former position.
(Fig. 10)
3. Insert the film leader into the slit on the Film Take-up Spool. (Fig.
11 )View original page 7Page 8 · Read text
4. Advance the film, making sure that the sprocket holes on the film are fully
engaged on the Sprocket Teeth. (Fig. 12)
5. Close and press the Back Cover firmly to lock it. Unfold the Film Rewind
Crank and turn it gently in the direction of the arrow until the possible slack
in the film has been taken up. (Fig. 13)
6. Advance the film and press the Shutter Release Button 2 ~ 3
times until the number "1 "appears in the Exposure Counter. As
you advance the Film Advance Lever, the Film Rewind Knob
rotates indicating that the film is properly advancing. (Fig. 14)
* When inserting the film, it is more convenient to set the Shutter
Speed Dial to a high speed rather than A (Auto) while advancing
the film to the number 1 position, to avoid a slow shutter speed
(the slowest is 16 seconds). When you are ready for shooting,
be sure to set the Shutter Speed Dial back to A (Auto).
* When inserting the film in cold conditions, the Film Leader may
become hard and brittle. Keep the leader warm in your hand
before insertion.View original page 8Page 9 · Read text
www.butkus.us
SETTING THE FILM SPEED
The film speed is the basic element for determining the
exposure, so please be sure to set the film speed correctly.
The film speed or ASA/DIN is listed on the film box.
1. Pull the Film Speed Indicator outer ring up, and
set it against the film speed number you are using.
(Fig. 15)
For example, if the film speed is ASA 100, set the indicator
on the Film Speed Dial to 100.
EXPOSURE INDICATION SWITCH
The Liquid Crystal Display such as Shutter Speed
Indicator etc. appears in the viewfinder either by
pressing Exposure Indication Switch or by
releasing the shutter. After shooting, the power
source will cut off automatically after 8 minutes in
order to preserve the life of the batteries. (Fig. 16)View original page 9Page 10 · Read text
VIEWFINDER INFORMATION
1. Microprism Band
2. Split-image Spot
3. Shutter Speeds
4. Exposure Adjustment
5. Bulb
6. Manual
7. Overexposure
8. Shutter Speed Indicator
9. Slow Shutter
10. Long Time Exposure
11. Underexposure
12. Battery Low Warning Signal
13. Flash Ready LED Light
The Shutter Speed, Slow Shutter and Long Time Exposure indications are always present in the
viewfinder. The information shown by the activated (Meter-ON) liquid crystal relates to exposure data
for the existing lighting conditions.
* In cold conditions the response speed of the liquid crystal may get slower. This is due to the
nature of the liquid crystal, and not to any camera malfunction.
* When using a polarizing filter, depending on the angle of rotation, there may be cases in
which you cannot see the liquid crystal indicators.View original page 10Page 11 · Read text
www.butkus.us
AE (AUTOMATIC EXPOSURE) PHOTOGRAPHY
Your KR-10 Super enables you to use automatic exposure where the shutter
speed is automatically selected, or manual exposure where you may select the
shutter speed yourself.
1. Set the "A" on the Shutter Speed Dial against the Shutter Speed
Index Line. (Fig. 17)
2. Use the F-Stop Ring to set the desired f-stop number against the
Index Line. (Fig. 18)4.butkus.org
3. When you press the Exposure Indication Switch, the correct shutter speed
for automatic exposure, will be shown by the Shutter Speed Indicator in the
Viewfinder. (Fig. 19)
4. When the Shutter Speed Indicator is within the orange band, this
means a slow shutter speed. You should either select a different f-stop
setting, or pay particular attention to camera shake. (Fig. 20)
5. When the (up arrow) Overexposure mark or the (down arrow)
Underexposure mark appears, you should select another f-stop number, as
the exposure is incorrect. (Fig. 21 )
* You can release the shutter without pressing the Exposure Indication
Switch, if you don't have to confirm the exposure information before releasing
the shutter.
F-STOP REFERENCE TABLE
* With film speed ASA 100
F-stop
Lighting Conditions
Number
Indoors f/2, 2.8
Outdoors, cloudy f/4, 5.6
Outdoors, sunshine f/8, 11
Beach in mid-summer and snow-scenes f/11,16View original page 11Page 12 · Read text
MANUAL PHOTOGRAPHY
Manual shutter speed is precisely controlled by a quartz oscillator, the
most accurate method of controlling the shutter speed ever. 4.butkus.org
1. Set the Shutter Speed Dial to the desired shutter
speed. (Fig. 22)
2. The letter "M" in the Viewfinder will pulsate to indicate
Manual mode. (Fig. 23)
3. If the (up arrow) Overexposure mark or the (down
arrow) Underexposure mark pulsates, you should select
another f-stop number as the exposure is incorrect. If
the (up arrow) or the (down arrow) marks do not
disappear, even after selecting a different f-stop
number, you should select a different shutter speed.
When both (up arrow) and (down arrow) disappear, the
exposure is correctly adjusted. (Fig. 24)View original page 12Page 13 · Read text
www.butkus.us
SHUTTER SPEED REFERENCE TABLE
Lighting Conditions Shutter Speed
Indoors 1 /30, 1 /60
Outdoors, cloudy 1/60, 1/125
Outdoors, sunshine 1/125, 1 /250
Beach in mid-summer, snow scenes 1 /250, 1/1000
HOLDING THE CAMERA
Holding the camera correctly when shooting is very important. (Fig. 25)
1. The camera should be positioned on the palm of your led hand so that you
can use your fingers to turn the Focusing Ring of the lens easily.
2. The index finger of your right hand should rest lightly on the Shutter Release
Button, while your right hand holds the camera body lightly.
3. Your right arm should be in a comfortable position.
4. Keep your led arm resting lightly against your body, and the camera should
just touch your forehead when you look through the viewfinder.
* It is important to shoot with the correct body posture, to avoid blurred or tilted
shots.
FOCUSING
Look through the viewfinder to compose your picture and focus by turning the
focusing Ring.
You can focus either by using the center Split-image Spot or the Microprism
Image Band that surrounds the center circle. (Fig. 26, 27)
Split-image Focusing
When the split image in the Split-image Spot forms a single image, the subject
is in focus.
Microprism Focusing
When the subject loses its "shimmering" effect and becomes very sharp, the
subject is in focus.View original page 13Page 14 · Read text
REWINDING THE FILM
(Always avoid direct sunlight when unloading the film).
After the last picture on the roll of film has been taken, rewind the film.
1. Push-in the Film Rewind Release Button on the bottom of the
camera, and it will remain locked into position. (Fig. 28) 4.butkus.org
2. Unfold the Film Rewind Crank and turn it in the direction of the arrow.
When the film has been completely rewound, the tension of the Film
Rewind Crank is released and it will revolve freely. (Fig. 29)
3. Pull up the film rewind Knob to its fullest extent and the Back Cover will
open. (Fig. 30) Remove the film, push the Film Rewind Knob back into
position and close the Back Cover.
* Never open the Back Cover during rewinding, as light will get in and ruin
your film.
* If you wind the film beyond the set number of frames the Film Wind Lever
sometimes gets stuck midway and the Film Rewind Release Button cannot
be locked in the down position. If this should happen, rewind the film by
keeping the Film Rewind Release Button pressed down with your finger.
EXPOSURE ADJUSTMENT SYSTEM
According to shooting conditions, the camera may be affected more by the background light than the
light of the subject itself. This will result in under (or over) exposed pictures.
In these cases, you should use the Exposure Adjustment system. You can also use the system when
you wish to create a deliberate effect of over (or under) exposure.View original page 14Page 15 · Read text
www.butkus.us
1. Turn the Film Exposure Compensation Dial to set the required number
against the Exposure Compensation Index Line. (Fig. 31 ) 4.butkus.org
Exposure
Subject
Adjustment
Scenery with a lot of sky
1 +2
Figure against the light
Figure with a snow scape
+1
or seascape background
Spot-lighted figure -1 ~ -2
* The Exposure Compensation Dial can be set to click
stop positions (1/3 steps) between the numbers indicated.
* Be sure to set it back to the "O" position after use.View original page 15Page 16 · Read text
B (BULB) SETTING
The B setting is used for shooting night scenes or long time
exposures.
1. Set the "B" against the Shutter Speed Index Line. The "B" mark in
the View finder will be static on display to indicate that the shutter
speed is set to B (bulb). (Figs. 32 & 33) 4.butkus.org
2. When you press the Shutter Release Button, the shutter will
remain open as long as the button is pressed.
* For long time exposures, use a tripod and cable release to
prevent camera shake.
(Webmaster: remember the camera battery is drained as it
holds the shutter open, always bring a spare should you expect to
take many long exposures)
Shutter Lock
Set "L" against the Shutter Speed Index Line to Lock the shutter
when the camera is not in use. This prevents accidental shutter
releasing. (Fig. 34)View original page 16Page 17 · Read text
www.butkus.us
FLASH PHOTOGRAPHY (1)
The RICOH SPEEDLITE 180 and 240 are available exclusively for use with this camera.
With these flash units, you can leave the shutter speed set on "A". Also the Flash Ready red LED
light conveniently lights up in the Viewfinder, so that you don't have to take your eye away from the
Viewfinder to see that the flash has recycled.
<With the Special 180 and 240 Flash Units >
1. Attach the flash unit to the camera Hot Shoe. (Fig. 35)
2. Set the "A" on the Shutter Speed Dial against the Shutter
Speed Index Line. (Fig. 36)
3. Set the f-stop number to the designated exposure for automatic shooting. The flash unit will
automatically control the amount of light for subjects within the distance range for automatic flash
photography.View original page 17Page 18 · Read text
4. Press the Exposure Indication Switch.
5. Turn the flash unit's power source switch on, and when
the flash is fully charged, the Flash Ready (red LED) Light
will light up, and the Shutter Speed Indicator will show
1/125 sec.
(The correct flash sync. speed) (Fig. 37)
6. Press the Shutter Release Button to shoot.
For further details, please refer to the instructions with the
flash unit.
Do not use other makes of flash units that have special signal pins exclusively for their cameras, as
this will result in incorrect exposure and may damage the circuitry of the camera.
* If the Shutter Release Button is pressed before the Flash Ready LED Light lights up, the shutter
speed will be the one indicated by the Shutter Speed Indicator.
FLASH PHOTOGRAPHY (2)
< With Flash Units Other Than the SPEEDLITE 180 & 240>
1. Set the Shutter Speed Dial to the synchronizing
speed of 1/125 sec. or slower shutter speeds. (Fig. 38)
* It is convenient to use the quick reference table on
MANUAL flash units, which shows the recommended f-
stop numbers for specific distances.
* When using other flash units, please follow the
instructions with that flash units.View original page 18Page 19 · Read text
www.butkus.us
SELF-TIMER PHOTOGRAPHY AND USAGE OF
THE VIEWFINDER CAP
The self-timer enables you to include yourself in your
own photographs for commemorative occasions etc.
1. After advancing the film, press the Self-Timer
Switch (Fig. 39)
2. The Self-Timer Indicator Light will pulsate and 10
seconds later, the shutter will be released. (Fig. 40)
3. If you wish to cancel the self-timer once it has
started operating, press the Self-Timer Switch again.
* If the film has not been advanced, the self-timer will
not operate.View original page 19Page 20 · Read text
Viewfinder Cap
When using the self-timer with the A (Auto) setting, to
prevent light from entering the viewfinder eyepiece and
causing in correct exposure, use the Viewfinder Cap
attached to the strap to cover the view finder eyepiece.
(Fig. 41 )
DEPTH OF FIELD
When you focus on a specific subject, a distance in front
of and behind the subject will appear acceptably sharp
in your picture. This area is called the "DEPTH-OF-
FIELD".
The depth of field can be determined in the following
ways:
1. Each lens has a depth of field scale. For example
with a distance of 3m/9.8 ft and using f/16, the area
within the two f/16 marks on the scale (about 2m/6.6 ft ~
8m/26.3 ft) will be in sharp focus. (Fig. 42)4.butkus.orgView original page 20Page 21 · Read text
www.butkus.us
INFRARED PHOTOGRAPHY
The infrared index mark is an index to correct the focusing point
when you use infrared film and red filters.
Since infrared light rays have a longer wave-length than visible
light rays, after focusing normally on the subject, you have to
adjust focus by setting that distance against the infrared index
mark.
(Webmaster: This only applies to B&W IR film. Very few places
develop and print this strange film.
Taking Infrared Photographs
1. Attach the red filter, and focus on the subject.
2. Shift that distance to the infrared index mark. According to the instructions enclosed with the film,
set the f-stop and release the shutter. (Figs. 43 & 44)
* Infrared light rays are invisible to the eye and the light meter, so please refer to the instructions with
the film for setting the f-stop numbers.View original page 21Page 22 · Read text
SPECIAL ACCESSORIES
XR WINDER 2
If you attach the RICOH XR WINDER 2 to this camera, the film can
be advanced automatically. You can also take continuous shots at
up to 2 frames per second. (Fig. 45)
* Before attaching the winder, wipe the contact points on both the
camera and the winder with a dry cloth.
XR DATA BACK RIQUARTZ
The RICOH XR DATA BACK RIQUARTZ enables you to take family souvenir photos,
study and business record pictures, etc. together with the day, month, year or time
(hours, minutes and seconds) as well as sports record films with times. Further more, the
XR DATA BACK RIQUARTZ can be used as a calendar or a watch through the LCD monitor.
In addition, this DATA BACK RIQUARTZ has an LSI incorporated to automatically correct for a leap
year,
31-day month and month with thirty or less days up to 1999. (Fig. 46)View original page 22Related documents and language editions
From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.