Film cameras
Yashica 635 User manual
User manual for Yashica 635. 44 pages in English. Read the original PDF, download or print a copy without registration.
44 pagesEnglish10.8 MB PDF

Loading your manual…Open PDF directly
Document details
- Brand
- Yashica
- Model / document
- Yashica 635
- Document type
- User manual
- Language
- English
- Pages
- 44
- File size
- 10.8 MB
- Category
- Film cameras
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 5 · Read text
www.butkus.us HOW TO REMOVE CAMERA FROM ITS CASE As a preliminary step in film loading. take out the camera f rom its case. 1. Open the front cover and detach it by unfastening the three snaps on the oase. 2. Pull out the Slide Locks' on both s i des. 3. Spread out the sides of the case and take out the camera. To retu rn the camera into its case, follow the foregoing procedure in re- verse.View original page 5
Page 6 · Read text
FILM LOADING 1. Open the Back Cover by turning the Back Cover Release R ing around tfre Triood Socket in the direction of "O" (Open). 2. After opening out the Back Cover, remove the Take-up Spool from the lower Film Chamber by pulling out the lower Soool Stud Knob. 3. While pulling out the upper Spool Stud Knob, set the Take-up Spool in the upper Film Chamber. CAUTION : Before loading the film, make sure the 35 mm Film Rewind Refease Button l27l is reset all the way into its original position.View original page 6
Page 7 · Read text
www.butkus.us
4. Pull out the lower Spool Stud Knob
and place a new roll of f ilm (standard
120 rollfilm) into position in the lower
Film Chamber.
5. Pull the f ilm leader gently and insert
it into the slot on the Take-up Spool in
the upper Film Chamber. Make sure the
f ilm leader is inserted into the wider one
of the two slots and its edge is set f lush
against the spool f lange.
6. Turn the Film Advance Knob until
the arrow "start" mark on the film
leader aligns with the triangular mark on
the edge of the picture frame. Then,
close the Back Cover.
IView original page 7Page 8 · Read text
7 . T o lock the Back Cover, press it
against the camera body and turn the
Back Cover Release R ing in the di-
rection of "C" (Close).
8. In the course of film loading, the
Exposure Counter automatically resets
to "S" (start) position.
9. Therefore, wind the Film Advance
Knob until the figure "1" appears in the
Exposure Counter Window.
10. After making an exposure, push the
Film-stop Release (20) and wind the
Film Advance Knob. The Exposure
Counter will register the number of
exoosed frames and the Film Advance
Knob will lock automatically.
11View original page 8Page 9 · Read text
www.butkus.us EXPOSURE SETTING AND
SHUTTER RELEASE
1. Turn the Shutter Soeed Control
Wheel (right) and Aperture Control
Wheel (left) in either direction with
your thumbs and position the desired
settings in the Shutter Speed/Lens Aper-
ture Indicator Window.
2. Make sure the shutter speed setting is
aligned properly with the indicator stub
on the window frame. As for the aper-
ture setting, it can be set at any in-
between setti'ngs, as required.
3. Push the Shutter Cocking Lever all
the way down. To make exposure, press
the Shutter Release Button gently.
CAUTION : Avoid resetting the shutter
speed after the Shutter Cocking Lever is
pushed all the way down.
13View original page 9Page 11 · Read text
www.butkus.us MAGNIFIER
For critical focusing, use the magnif ier
incorporated in the focusing hood.
1. To set the magnif ier to viewing
position, press the center of the
Focusing Hood half-way as illustrated.
Place your eye as close to the lens as
possible and secure critical focus.
2. Before closing the Focusing Hood,
fold away the magnif ier by pressing the
frame down as shown in the illustration.
SPORTSF IN DE R
Use the sportsf inder incorporated in the
focusing hood when shooting moving
subjects.
1. Push the center of the Focusing
Hood all the way until it locks into
folded position. Then, hold the camera
at eye-level and sight your subject
through the small square hole.
2. To reset the Focusing Hood to its
original position, push the release but-
ton, as illustrated.
17View original page 11Page 12 · Read text
FILM UNLOADING FILMENTLADEN
After the twelfth and f inal Wenn Sie die zwolfte und letzte frame has been exposed, wind the Aufnahme gemacht haben wird der
Film Advance Knob about six times Filmtransportknopf etwa sechsmal des to take up the film leader. Then, weitergedreht, bis das Ende
ooen the camera Back Cover and Films aufgespult ist. Dann wird der take out the exposed film as illu- Rrickdeckel der Kamera geoffnet,
strated. Paste the seal securely and und der belichtete Film wie aus der
send the f ilm out for Processing. Abbildung ersichtlich herausgenom- men. Das Filmende sorgfdltig
zukleben und den Film zum Ent-
wickeln einsenden.
RETRAIT DU FILM PARA RETIRAR LA PELICULA
Apres avoir expos6 la dernidre des Despuds de expuesto el 0ltimo
12 photographies, actionnez le cuadro, accione la Perilla de Avance bouton d'avancement du film en- de la Pelicula unas seis veces Para
la viron six fois pour enbobiner l'a- enrollar el extremo de gufa de
morce du film. Ensuite, ouvrez le Pelfcu la.
couverc le arr iere de l'aPPare il et Luego abra la Tapa Trasera de la
sortez la cartouche exPosee, comme c6mara y extraiga el rollo de pelfcula
sur l'illustration. Collez l'extr6mit6 como se ilustra en la foto. Pegue el
et envoyez le film pour d6veloPPe- sello bien y envie la Pelfcula al
menr. boratorio para su revelado. *
19View original page 12Page 13 · Read text
www.butkus.usFLASH EXPOSURE
Your Yashica 635 features built-in M-X synchronization. Set the
Synchro Selector to either M or X position, depending on the type
of flash in use. Then, plug the PC cord of your flash unit into the
Synchro Terminal.
Correct exposure setting for flash photography can be obtained
readily by referring to the guide number of the flash bulb or
electronic f lash. For color photography, use the proper type of f lash
bulbs, or else, use color compensation f ilter.
Consult your dealer for the proper type of flash unit for Vour
camera.
Selector
Position M X X
Bu lb used M type F type Electronic Flash
1/60 Any Speed Shu tter Any or (When using Speed Speed slower Self-timer)
20View original page 13Page 14 · Read text
SELF-TIMER
To include yourself in the picture or for
delayed action shots, use the Self Timer
and oroceed as follows :
a. Advance the film by winding the
Film Advance Knob.
b. Set the shutter sPeed, charge the
shutter by pushing down the Shutter
Cocking Lever and move the Self-Timer
Lever all the way in the direction of the
arrow.
c. Press the Shutter Release Button - the shutter will be tripped about B sec.
Later.
CABLE RELEASE
The use of a cable release to trip the
shutter will prevent camera shake in
close-up shots and long exposures'
Use a standard "screw-on" tYPe cable
release. Unscrew the ring around the
Shutter Release Button and set the
cable release securely over the Shutter
Release Button. Consult your dealer for
the proper type of cable release.
23View original page 14Page 15 · Read text
www.butkus.us LENS OPENING
The lens opening or aperture forms one
factor for controlling the intensity of
light transmitted through the lens and reaching the film plane. Your Yashica C) camera features an ultra-sharp Yashihon f 3.5 CI9l4 f 5.6 f8 It lens with aperture settings of t/3.5, 4, 5.6, B, 11, 16 and 22. The maximum ab^
aperture is f/3.5, while the minimum is
f /22.
To adjust the lens opening, rotate the Aperture Control Wheel with your at) f rl f r6 122 thumb and set the desired setting in the sg Shutter Speed/Lens Aperture Indicator
Window. The lens opening can be set at
any in-between setti ngs, as required.
25View original page 15Page 16 · Read text
SHUTTER SPEED VERSCHLUSSG ESCHWI N DIG KE IT
The shutter speed controls the length of ex- Mit der Verschlussgeschwindigkeit wird die
posure of the photosensitive emulsion of the Belichtungszeit der lichtempfindlichen Film-
f ilm to light. oberf ldche kontrol liert.
Prdzisions Your Yashica camera is equipped with a lhre Yashica Kamera ist mit einem precision engineered Copal Shutter with speed Copal Verschluss mit folgenden Verschlussge-
settings of 1, 'l /2, 1/4, 1lB, 1115,1/3O,1/60, schwindigkeiten ausgestattet : 1, 1/2, 114, 1/8,
1/125, 11250 and 'l1500 sec., and B. 1 115, 1 /3O, 1 160, 1 1125, 1 /25o und 1 /5OO Sek.
The B setting is for exposures longer than one und "B".
second. At this setting, the shutter remains Bei ldngeren Belichtungszeiten als 1 Sekunde open as long as the Shutter Release Button is wird der Verschluss auf "B" eingestellt. Bei
kept depressed. dieser Stellung bleibt der Verschluss solange
At 1/15 sec. or slower speeds, mount your offen, wie der Ausloseknopf gedrtickt gehalten
camera on a tripod and use a cable release to wird.
trip the shutter in to prevent camera shake. Bei 1 /'l 5 Sek. oder bei langsameren Gesch-
windigkeiten wird der Gebrauch eines Stativs
sowie Drahtauslosers empfohlen, damit keine
verwackelten Bilder entstehen.
27View original page 16Page 17 · Read text
www.butkus.us HOW TO HOLD YOUR CAMERA
2. Hold your camera over- 3. For low angle shots, place
head, and focus and com- your camera on the ground.
pose as i llustrated, wnen
shooting over fences and
other obstacles.
1. Normally, hold your
camera at chest-level, with
your elbows pressed against
your body to Provide extra-
steady support, and Press the
Shutter Release Button poftruf"d,f, gentlY. 4. Your knee will orovide steady support when shoot- 5. Use the soortsfinder for
ing low subjects. shooting at eye-level or
photographing moving sub-
jects.
29View original page 17Page 18 · Read text
DEPTH OF FIELD
The deoth of field is the area in front
and behind the subject on which the
subject is focused, within which all
objects will also appear acceptably sharp
in the picture. lt varies with the aper-
ture and is more extensive (a) when the
lens is stopped down, (b) when the
camera is focused on a distant subject,
and (c) in the background rather than
the foreground.
The depth of f ield can be determined by
ref erring to the depth-of-f ield scale
around the Focusing Knob. With the
camera focused on a subject at 10
meters and an aperture of t/16, the
depth-of-field will be from about 5
meters to infinity or, in other words,
the range enclosed by the number 16 on
both sides of the distance index mark
(3.5).
31View original page 18Page 19 · Read text
www.butkus.us FILM LOADING (35 mm film)
1. Pull out the 35mm Film
Rewind Release Button (R) and
give it a slight twist in either
d irection.
2. I nsta ll the 35 mm P ictu re
Frame by proceeding as follows:
After making sure that the
sprocket end of the frame is set
toward the upper Film Chamber,
fit the spring bar into the lower
edge, and, while pushing the frame
in the direction of the arrow,
install it properly into position.
3. Reset the 35 mm Film Rewind
Release Button to its original
position by turning it in either
d irection.
4. Screw the Spacer Ring on the
threaded mount around the right
spool stud in the lower Film
Chamber.
33View original page 19Page 21 · Read text
www.butkus.us
7. Set the 35 mm Take-up Spool in the upper
F ilm Chamber. First, f it the cut-out on the
right into the right spool stud. Then, while
pulling out the 35 mm Film Advance Knob
(Spool Stud Knob), set the spool into postion.
Feset the Film Advance Knob to its original
position and wind it until it locks auto-
maticallv.
B. lnsert the f ilm leader into the slot on the
Take-up Spool and, after pressing the 35 mm
Film-stop Release located directly below the
Film Rewind Felease Button (R), wind the
35 mm Film Advance Knob.
9. After making sure the perforations on the
film properly engage the sprocket teeth, set
the Pressure Plate by matching the Guide Pins
with the Guide Sockets and pressing it f irmly
against the 35 mm Picture Frame.
37View original page 21Page 22 · Read text
i 0. Close and lock the Back Cover. Then, press the 35 mm Film-stop Release and wind the 35 mm Film Advance Knob. Repeat this procedure three times to advance the exposed frames. 1 '1. Turn the 35 mm Exoosure Counter in the direction of the arrow and al ign the f igu re " 1 " with the index dot. FOCUSING AND PICTURE coMPosrTtoN 1. Focus in the manner Indicated previously in this manual. For picture composition, use the red rectangular frame on the viewing screen. The four short lines are for parallax correction. 2. Use the 35 mm Sportsf inder Mask when shooting at eye-level (See illustration).View original page 22
Page 23 · Read text
www.butkus.us FILM REWINDING 1. After the full length of the film has been exposed, rewind the film into its cassette. First, pull out the 35 mm Film Rewind Release Button (R) and give it a slight twist in either direction. 2. Rotate the lower Spool Stud Knob clock- wise in the direction of the arrow until the f ilm is returned completely into the cassette. 3. Open the Back Cover and remove the cassette by pulling out the Spool Stud Knob.View original page 23
Page 25 · Read text
19. Filmmerkscheibe 19. Rappel du typewww.butkus.usde f ilm 19. Ventanilla del Tipo de20. Transportsperrknopf (ftir 20. Bouton de debrayage du Pelfcu la
120 Rollf ilm) film 20. Aflotador del Tope de
21. Bajonettverschluss 21. Boucle de fermeture Pelf cu la
22. Ose fur Tragriemen 22. Attache de la courroie 21. Bucle f iador de Desplaza-
23. Filmzahlwerkfenster Fenetre du compteur m iento
24. T ief enschd rfenska la d'images 22. Nebilla para la Correa
25. Entfernungsskala 24. Echelle de profondeur de 23 Ventanilla del Cuenta-
26. T ransportknopf ftjr champ E x pos ic io nes
35 mm Film (Fitrn 25. Echelle des distances 24. Escala del Carnpo de Fondo
spu lenarretierung) 26. Bouton d'avancement 25. Escala de Distancras
27. Rirckspu lausloseknopf f tir pour f ilms 35,.nrn 26. Perilla de Avance de la
35 mm Film (Bouton de retenue oe la PelicLt la de 35 mnr
28. Transportsperrknopf ftir bobine) (Carrete Receptor)
35 mm Film Bouton de verrou illaoe rie 27. Boton para el Rebobinado
29. Zubehorschuh rebobi nage de Pelfcula de 35 mm
30. Rtickspulknopf ftlr 35 mm Bouton de ddbrayage 28. Af lolador del Tope de
Film (Filmspulenar- pour f ilms 35 mm Pel ictrla cle 35 mnr
retierung) zv. Sabot d'accessoires 29. Mrrcsca lrara Accesorios
31. Stativsockel 30. Bouton de rebobinage 30. Perilia de Bebobinado
32. RLlckdeckelverschluss pour filrns 35 mm para Pelfcula de 35 rnrn
33. Rtlckdeckel (Bouton de retenue oe ra Jt. Contacto de Rosca para el
34. Filmandruckplatte bobine) Tripode
35. 35 mm Filmaufwickel- Douille de tr6pied 32 Aro Aflojador de la Tapa
sou le 32. Bouton de fermeture du T rasera
36. 35 mm Bildrahmen couvercle arriere 33. Tapa Trasera
37. 35 mm Filmkassette Couvercle arriere 34. Placa Opresora
34. Plaque de pression 26 Carrete R eceptor para
35. Bobine d'enrou lement Pelicula de 35 mm
pour f ilms 35 mm 36. CuadroFotogr6f icode 35 mm
36. Cache d'rnraqe 35 mm 37. Casette de Pel icLr la cle
31. Cartouche 35 mrn 35 rnmView original page 25Page 26 · Read text
ENTFERNEN DER KAMERA POUR RETI RER L'APPAREIL COMO SACAR LA CAMARA AUS DER BEREIT. DE I-'ETUI DEL ESTUCHE SCHAFTSTASCHE Avant de charger le f ilm, retirer Para poder colocar la perfcula en Vor dem Filmeinlegen muss die l'appareil de l'6tui. la carnara, primeramente habrd Kamera aus der Bereitschaftss- 1. Ouvrir Ie couvercle avant et que sacarla del estuche. tasche entfernet werden. le ddtacher en sdparant les trois 1. Abra la tapa delantera y des- 1. Die Vorderseite der Bereit- pressions sur la base. m6ntela aflojando las tres re- schaftstasche offnen und durch 2. D6tacher les fermetures de tenciones de la base. Losen der drei Druckknoofe am chaque cote. 2. Exlraiga los f iadores a ambos Unterteilentfernen. 3. Ecarter les c6t6s de l'6tui et lados. 2. Die berden Seitenversch ltisse ddgager l'appareil. 3. Abra los lados del estuche y losen (hochziehen). Pour remettre l'appareil dans extraiga la camara. 3. Die beiden Seitenteile der l'6tu i, ex6cuter les op€rations Para volverla a colocar en el Bereitschaftstasche ausbreiten pr6c6dentes dans l'ordre inverse. estuche, siga el procedimientound die Kamera herausziehen. i nverso. Um die Kamera wieder in die Bere itsc haf tstasc he ein zu f iigen , befolge man die oben erw6hnten Vorgdnge in umgekehrter Reihenf olge.View original page 26
Page 27 · Read text
www.butkus.usFILMEINLEGEN CHARGEMENT DU FILM CARGA DE LA PELICULA
1. Zum Entriegeln des Riick- 1. Ouvrir le couvercle arridre en 1. Abra la Tapa Trasera girando
deckels wird der Riickdeckel- tournant le bouton entourant la el Aro de Aflojamiento alrede-
verschluss, welcher den Stativ- douille du trdpied oans te sens dor del contacto del tripode en
sockel umschliesst in der "O" "0" (ouvrir) direccion de "0" (Abre).
-R ichtung (off nen) gedreht. 2. Aprds avoir ouvert le cou- 2. Desou6s retire el Carrete
2. Nach dem Offnen des vercle, enlevez la bobine d'en- Receptor del compartimiento
Riickdeckels wird die Filmauf- roulement du f ilm du comparti- inferior de la pel fcula tirando de
wickelsoule durch Herausziehen ment inf6rieu r en tirant le la Perilla de Rebobinado.
der unteren F ilmspu lenar- bouton de retenue du film 3. Mientras tira de la Perilla de
retierung der unteren Film- inf 6r ieu r. Rebobinado superior, coloque el
kammer entnommen. 3. En retirant le bouton de re- Carrete R eceptor en el Com-
3. Obere Filmspulenarretierung tenue du film sup6rieur, intro- partimiento de la Pelfcula.
herausziehen und Aufwickel- duisez la bobine d'enroulement
spule (Leerspule) in die obere dans le compartiment supdrieur.
Filmkammer einftigen.
VORSICHT: Vor dem Ein- ATTENTION : Avant de char- ATENCION : Antes de colocar
legen des 35 mm Filmes ver- ger le film, assurez-vous que le la pel icula. cerci6rese que el
gewissere man sich, dass der bouton de verrouillage (27) est Bot6n (271 de Aflojamiento para
R iickspuf ausliiseknopf l27l remis en place correctement. el Rebobinado de la Pelicula de
wieder in seine urspriingliche 35 mm, est6 en su posici6n
Lage versetzt wird. original.
8View original page 27From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.


