Film cameras
Konica Autoreflex T (Ver 1) User manual
User manual for Konica Autoreflex T (Ver 1). 40 pages in English. Read the original PDF, download or print a copy without registration.
40 pagesEnglish4.7 MB PDF
Loading your manual…Open PDF directly
Document details
- Brand
- Konica
- Model / document
- Konica Autoreflex T (Ver 1)
- Document type
- User manual
- Language
- English
- Pages
- 40
- File size
- 4.7 MB
- Category
- Film cameras
- Document date
- Not specified in catalog
Search available document text
Find a term, then jump to its page in the original PDF. Image-only pages may not be searchable; check the PDF for exact wording and diagrams.
Page 7 · Read text
MAJOR SPECI FICATIONS FOR KONICA AUTOREFLEX.T
Camgra Tvpe: precision, professional 35mm SLR with metal focal plane shutter and fully automatic CdS
Thlofth-Tfie:tens exposure meter operation.
.,
Picture Size: 24 x 36mm (1" x l'l12"').
Fif m: Standard 35mm cartridges, 2O or 36 exposure.
Standard (Normal) Lenses: Hex_anon AR 57mm flr.2 (7 elements in six groups);Hexanon AR 57mm
ps);HexanonAR52mmf/1.s(6elementsinfivegroups);Allfocusfrom
infinity to 18 inches.
Lens Mount: KoNIcA bayonet mount Type II. Diameter 47mm. Flange to film distance' 40.5mm.
Diaphragm Action: Fully automatic diaphragm. Automatic EE lenses reopen to full aperture for focusing
@'Manua1aperturecontrolandDepth.of-Fieldpreviewbuttonprovided.
Shuttgr: Hisynchro Metal Copal Square S. "B'o (Bulb), 1 to 1/1000 second, in even 1:2 progression.
ffi;ilp";Jai;i;" top of Sh.rttet Release locks when Meter switch (3) is in locked (L) position. "in"ru.
X - synchro for electronic flash to 11125 second;
M - synchro for flastrbulbs to U1000 second.
Viewf inder: EyeJevel pentaprism. Fxtremely bright. Has central Micro Diaprism area surounded by plain circie. gatance is fine, almost invisiblJfresnel ground glass area. Meter needle, f/stops, shutter Fr"aTlas" tittery check, index point for stopped-down meterinf, under- and overexposure malks, automatic and fieed,
n--on-automatic mode signal visible outside focusing/viewing area.
6View original page 7Page 9 · Read text
INSERTING BATTERIES, AND METER SWITCH
E
I t-. \
OFF +
-+
<1 3tt
INSERTING BATTER IES METE R SWITCH
The compound CdS meter of the KONICA Autoreflex-T The meter switch and Shutter Release Lock (3) are combined
operates on two Mallory No. PX-675 or Eveready EPX-675 in a single lever encircling the shutter release button. When
or equivalent l.3V mercury batteries. Handle batteries by the lever is rotated so that the black index mark lines up with
edges to keep current conducting surfaces clean. If soiled the red mark on the camera body, the meter battery is turned
wipe clean with soft, dry cloth. "on" and the shutter may be released.
When c:unera is not in use. the lever should be rotated so that
theTurn the cover cf the Mercury Battery Chamber (39) the black index mark lines up with "L" (lock) mark on
counterclockwise with a coin and detach it from the cameral This switches the mercury battery off, and locks against accidental exposure.chamber.
uses two 1.3V. Mallory PX-675 or EvereadyInsert the two cells into the Mercury Battery Chamber, the a The meter
use" + " side up, according to the figure printed on the seal, EPX{75 Mercury battery cells. Be certain not to
inside the chamber. similar looking batteries of different voltages.
o When not using the camera for a length of time, remove
the battery cells and store them in a cool, dry place.After the cells have been put into position, put the cover on
the chamber and screw it tightly.View original page 9Page 11 · Read text
r FILM LOADING
Nvdtr dr '0!
The KONICA Autoreflex-T takes standard 35mm film Pull the Back Cover Lock (24) and open the Back Cover
cartridges. (35) of the camera.
When loading avoid direct sunlight. Try to load camera in the Place the film cartridge in Film Cartridge Chamber (26)
in illustration (above, right). shade. If no shade is available, use your own body to shade 2 as shown
the camera.
.10
LView original page 11Page 13 · Read text
ta
U
,--n
--
A To wind off the exposed frlm leader, operate the Film TO CH EC K FI LM ADVAN CE v Transport Lever (13) several times, alternately depress-
ing the Shutter Release Button (1) until No. I appears Movement of the Film Rewind Knob (20) may be observed
opposite the mark in the Film Counter Window (2). to check if film is moving through the camera. First the slack
must be taken out of the film, as described on page (11). If
frlm is moving through the camera, the Film Rewind Knob
will rotate counterclockwise.
A single stroke of the Film Transport Lever moves the film
one frame forward, cocks the shutter, and advances the film
counter. The latter indicates the number of pictures that have
been taken. At the end of shooting, after the film has been
rewound, opening the camera back automatically returns the
film counter to "S" (Start) position.
12View original page 13Page 14 · Read text
SHUTTER AND APERTURE www.butkus.us KONIGA
AT'TOREFLEX
F-number r?1.4 is 2 2.8 4 5.6 I ll 16
Amount-of- 2 1 Lisht Ratio +++++,+r
The KONICA Autoreflex-T is equipped with an all-metal, Intermediate speeds cannot be set on the Copal Square S
Hi-Synchro Copal Square S focal plane shutter. It controli strutter. However, speeds may be changed before or after
the length of time that light is permitted to enter the cocking the shutter.
camera and expose the film. A unique feature of the Copal
Square S shutter mounted in the KONICA Autoreflex-T is
that the Shutter Speed Dial (f Z) is located on top of the The amount of light that is allowed to enter the camera and
camera, where shutter qpeeds are changed with the camera strike the film is controlled by the iris diaphragm. The
at eye level for more convenient operation. The Copal relative size of the opening or aperture is usually indicated
less Square S shutter is noted for exteme rylit second accuraly. by the use of f/stops. The larger the f/stop number the
admits less light than f/4. _Strgtter lpeeds are linearly proportional as follows: !, ll2, light admitted. Thus f/16u!, tlg, Llts, tl3o, u6o, Llt25, rl25}, 1/500, and
U1000 second, plus "B" (Bulb), used for-exposuies of When a KONICA Hexanon AR (EE) lens is mounted on the
more than I second duration. Autoreflex-T, the aperture is automatically closed to the
correct f/stop after the shutter release is pressed. The
The Copal Square S shutter is synchronized for electronic needle in the window indicates the f/stop io which the
flash speeds up to U tZS second. This figure is marked in aperture will close at the moment of exposure by the AEC
red on the shutter speed dial. Expendable flastrbulbs of (Automatic Exposure Control), through-thelens exposrre
nocessary to match the needle to al'M-" 1nd f'!'P" types may be used at all qpeeds up to and meter systern. It is not
including U1000 second. mark when the EE lenses are used.
lenses may also be used withThe "B" (BuIb) is used to make exposures longer than I Preset and manual diaphragm
second. A tripod or other support should be used for ..B" the AEC meterirg system. With these, the diaphragm is
and for all shutter speeds slower than l/30 second. stopped down manually until the meter needle is opposite
the mark near the f/1.4 setting in the finder.View original page 14Page 16 · Read text
www.butkus.usAEC (AUTOMATIC EXPOSURE CONTROL} METERING AND KONTCA AUTOREFLEX :,c
NON.AUTOMATIC CONTROLS :{;QThe Autoreflex-T is the world's first professional Through- Stopped-Down Exposure Metering: With KONICA and .t=
The-Lens metering 35mm Single Lens Reflex camera to other lenses having manual or preset diaphragm (not EE), as IDhave fully automatic AEC exposure control. The AEC well as with extension tubes and bellows, the Stopped- :-|meter system establishes contact to all KONICA Hexanon Down method is used. Here the exposure is read at the ,()AR lenses by means of a meter-actuated coupling lever. actual aperture used to make the picture. The needle in the
Center the Control is brought Index then simply to loaded release is depressed, the spring shutterWhen the Mark z changing figure. This can done opposite also be by limitaperture the f lt.4 the lens is tripped to close to the indetermined by this coupling lever. This limit is the precise the shutter speed setting. Literally thousands of lenses can ,9
aperture required for a perfect exposure at that instant be used with this system. In addition to KONICA Auto- t.',when you press the button. Reflex lenses, lenses in mounts for KONICA FP, Pentax/ zo
Praktica, Exakta/Topcon and Nikon/Nikkormat can beWith a KONICA Hexanon AR lens installed in your used for the Stopped-Down metering with the Autoreflex-TAutoreflex-T there is no need to waste time before shooting !.2,i via their respective KONICA Lens Adapters. needle to only need to focus match the a mark. Youto -{ and ;iao press assured then sttutter release-remainingcompose, theall the time that correct exposure is being taken care of. Manual Exposure Settings: Should you have some special r=
Full concentration can thus be made on the spontaneous or exposure idea in mind, you need only move the diaphragm
esthetic needs of your photography. In actuality, the ring of your KONICA Hexanon AR lens from the EEKONICA AutoreJlex-T offers not one but three optional setting to any f/stop desired. Thus, with this and the other r!:{:6
methods of aniving at the coruect or desired exposure. metering systems just discussed, exposure with the KONICA ,., C)
Autoreflex-T becomes a versatile tool which gives you freedom to exploit its automation or to choose other ;ozAEC Metering: With a KONICA Hexanon AR (Electric- ;-{ exposure methods. (See page 2l). needle serves onlyEye) lens, the viewfinder in the to let ".j:o7t meteringyou know the at which fully automatic f/stop .l-system will make the picture for you. Shutter anddiaphragm are cross-coupled. Thus if you choose a high icn
shutter speed to stop action, the diaphragm will be set for a
wider opening automatically. On the other hand, should NOTE: With extremely fast films, the electric eye of the l;:i.'il
you need a smaller stop for greater Depth-of-Field, simply Autoreflex-T will not couple to the wider apertures of i*.
turn the Shutter Speed Dial (17) to a slower speed. The the lens diaphragm at very slow strutter speeds.'This is i;'
strowsneedle in the information center of the Viewfinder will automatically indicated in the viewfinder which
keep you informed. At the same time, you can read the the maximum apertures at which the meter is coupled
slrutter speed setting below the viewing area (see page 17). under those conditions. i;l
i15::l:lView original page 16Page 17 · Read text
,,CONTROL CENTER'' VI EWFINDER
CORRECT EXPOSURE RANGE FOR T11,2 HEXANON INDEX POINT FOR STOP-DOWN READINGS: Thisisused
LENSES: With a Hexanon AR f/1.2 lens mounted on the when Non-Electric-Eye (EE) lenses are mounted on the
KONICA Autoreflex-T, correct exposure will be obtained so Autoreflex-T. In this case the lens is set for manual operation
is long as the needle is opposite or between f/numbers in the and the diaphragm ring turned until the meter needle
white portion of the scale. Underexposure will result when opposite the Index Point for Stopped-Down Lens Aperture
the needle swings into the upper red area (40). Overexposure (41). If it is desired to work at a fixed f/stop, the needle can
will result when the needle swings into the lower red area be brought into place by changing the shutter speed.
(48).
CORRECT EXPOSURE RANGE FOR LENSES SLOWER MANUAL APERTURE INDICATOR: When a Non-Electric-
THAN t11.2: When a KONICA Autoreflex-T lens, slower Eye (EE), manual or preset diaphragm lens is mounted on the
than fll.2 is installed on the camera, a red Maximum KONICA Autoreflex-T, or extension tubes and bellows are
Aperture Indicator Band (44) will drop into place (i.e. tn the used, a white letter "M" (43) appears at the top of the scale.
diagram at the right, the maximum aperture indicator sttows When the "M" is visible, the Stop-Down method of exposure
that the maximum aperture available is f/1.8). With lenses determination must be used as described above.
slower than f 11.2, the needle must be in a white area below
the maximum aperture indicator.
NOTE: Hexanon AR (EE) lenses for previous KONICA
Auto-Reflex czuneras may be modified to work properly with
BATTERY CHECK MARK: The Battery Check Mark (46) is the Autoreflex-T AEC exposute automation. Your dealer can
located between f/8 and f/11. See instructions for checking give you full information and service, or you can contact our
battery strength on page 9. service centers.
16View original page 17Page 19 · Read text
AEC: AUTOMATIC EXPOSURE CONTROL
Full Aperture, AEC Metering: Veq
The focusing screen of the KONICA Auto- :3v reflex-T is always at maximum brightness
when a KONICA Hexanon AR (EE) lens is
used, since exposure determination is made
with the lens at its widest or maximum
aperture. J
speed ASA or DIN film The correct the Set setting 1 2 Determine the shutter sped Speed lndicator Film in the be set must film ' speed (ASA or DIN) Window ( 14) on top of the Shutter Speed
Dial (17), before taking pictures in order to Lift the outer collar surrounding the Select the proper shutter speed. Out-
obtain correct exposure. ASA and DIN Shutter Speed Dial (17) and turn it to doors, l/125 is a good choice, l/30 for
ratings for the film you use will be found on the left or right until the correct ASA indoors. The higher the shutter speed,
the carton, or on instruction sheet packed or DIN value shows in the respective the better the action-stopping power.
with the film of your choice. Filrn Speed Indicator Window (14) on Use of a slower shutter speed results in
top of the Shutter Speed Dial. When a smaller aperture and greater Depth-
aligned properly, the collar will drop of-Field.
into place.
(12s0)(l0oo)(64o)(s0o) (32ox2so) (l6oxl2s) (80)(64) (4oX32)
The figures in brackets in the chart at right ASA 1600 800 400 200 100 50 2s are intermediate values for film speeds
15 indicated only by dots on the film speed DrN 33 30 27 24 2t 18 (32)(31) (2e)(28) (26)(2s) (23X2o) (2o)(re) (r?Xl6) scale.
18View original page 19Page 21 · Read text
SAFETY INDICATORS IN VIEWFINDER
il 1.2 t/1.4 f /1.8
o
Lt
aA0ctxo
ILo
T'trf
When the meter needle indicates an underexposure, choose a
slower shutter speed. When it indicates an overexposure,
select a faster shutter speed. This can be done without When the Electric'Eye is not used ...
removing the camera from your eye. You simply rotate the
Shutter Speed Dial (17) watching the Shutter Speed (42) n To set the diaphragm manually, simply rotate the Aperture
the viewhnder. Pictures may be taken under ttre AEC (EE) Ring (ll) to the right, while depressing the EE Lock Button
system, as long as the needle is visible somewhere within the (12) on the aperture ring until the desired f/stop is opposite
correct exposure range. tf a full turn of the Shutter Speed the index mark. Manual diaphragm setting is helpful when a
Dial does not drive the meter needle to come within the deliberate under- or overexposure is desired for some special
correct exposure range, pictures cannot be taken under the effect. During manual operation the letter "M" will appear
AEC (EE) system. However, pictures may sometimes be above the f/stop scale. For normal AEC (EE) operation,
taken by setting the camera in non-automatic mode. remember to return the aperture ring to "EE", where it will
lf you wish to use a specific lens aperture, for example, a lock in place automatically.
small aperture for greater Depth-of-Field or a large aperture
to throw backgrounds out of focus, turn the shutter speed
dial until the needle is opposite the desired aperture. Make
sure that the shutter speed dial clicks into place at the desired
shutter speed. When shooting for Depth-of-Field, make sure
to use a tripod if you are shooting at slower than 1/30 second
to prevent blur caused by camera movement.
20View original page 21Page 22 · Read text
OPTIONAL STOPPED.DOWN APERTURE METERINGwww.butkus.us KOt\ilCAtrhl
AT'TOREFLEX JT
OFF
I
.f T.
b gu$y6,- /s.-
When preset or manually operated KONICA Hexanon DETERMINE THE EXPOSURE lenses are used, or when KONICA Fp*, pentax/praktica, 4
Exakta, or Nikon lenses are used via KONICA adapters, the Turn the Aperture Ring (ll) on your lens to the left or
stoppeddown method of determining correct exposure is right until the Meter Needle (45) lines up with the Index
used. This method is also used when extension tubes or Mark (41) opposite fll.4 in the Viewfinder.
bellows are employed in close-up photography.
If you wish to work at a fixed aperture, set the aperture JI SET THE FILM SPEED (ASA oT D I N) ring and then turn the Shutter Speed Dial (lZ) until the I
Lift and turn the outer collar around the S.rutter Speed isY"1"1visibleNeedlein theisviewfinder.opposite the index mark. The shutter speed
Dial (17), until the appropriate ASA or DIN rating is in the
Film Speed Indicator Window (14; o1 115r.
cHoosE A SHUTTER SPEEDI 2
-?Y MAKEPOSITIONSURE(REDTHEDOT).METER SWITCH IS IN ..ON" * FP-FM-FS-F series of KONICA SLR camerasView original page 22Page 23 · Read text
USING PRESET OR MANUAL LENSES
The f/stop settings in the Viewfinder are not used wnen the
stopped-down method of exposure determination is em'
ployed. Occasionally the Meter Needle will not come to rest When a manual preset lens
opposite the Stopped-Down lndex Mark (41) no matter in is to be used ...
which direction the Aperture Ring (ll) is turned. In this
case, adjust the Shutter Speed Dial (17) until the needle lines For convenience with preset diaphragm lenses, set the preset
up with the Index Mark. selector ring to the smallest aperture. This will then allow the
diaphragm setting.ring to ride free to any desired setting in
In photomicrography the Meter Needle is brought to the the lens range.
lndex Mark by adjusting the light and the shutter speed.
,
When using Hexanon reflex mirror optics lenses, the Meter
Needle is brought to the index by bringing the appropriate
neutral density filter into place, or by adjusting the shutter
speed. These lenses do not have an iris diaphragm.
When stopping a lens down for closeups, keep your eye
against the Viewfinder eyepiece to protect the latter from the
entry of strong light.
22View original page 23Page 24 · Read text
.r ;HINTS FOR UNUSUAL EXPOSURE SITUATIONSwww.butkus.us KOhilGAnlE AUTOREFLEX IIThe compound dual CdS metering system in the Autoreflex-T is very selective, .2 ax{and is generally not unduly affected by subject matter outside its primary li. A
exposure reading range. [t is programmed to obtain its primary exposure data qi. 'nfrom the main subject area. This is deemed to be the lower center third of the ,rO
total area. The peripheral upper and marginal two thirds contributes in a lesser n
degree to the compound exposure data. There are however a number of unusual
situations that require special handling. czc
Against-the-Light Shots: In such situations the light can shine directly into @Cthe camera and adversely affect readings for the main portion of the subject. Inmost cases temporarily changing the film speed setting to a value one-half (ll2) rthat of the actual film speed will givc an extra stop exposure to correct the
situation. In extreme cases, use the regular film speed but move the camera in mxclose to read the important subject areas. After taking a reading, depress the
Shutter Release Button partially, which will lock the meter needle at -9oa
the close-up reading; move back, and I' then depress the Shutter Release m
Button the rest of the wav to make
the exposure. a-c Very Light or Dark Backgrounds: When a small light subject is against a {
Large dark background, the meter may read the entire area as a dark subject and overexpose the main subject. 6z
Conversely, with a small dark subject against a large light background, the meter @
may read the entire area as a light subject and underexpose the main subject. In
this case, a close-up reading as described under "Against-the-Light Shots" can be
found helpful.
N0TEI Should you temporarily change the ASA setting to get more exposure
in backlighted situations, do not forget to reset your meter to the normal rating
for regular shots.
23View original page 24Page 25 · Read text
HOLDING YOUR CAMERA
{
b
comfortably for your hand o Hold the Camera securely -
One secret for getting ultra-sharp pictures is to prevent Vertical shots add variety to a series of pictures. They are
accidental camera movement. To do this it is sugested that especially desirable when making head and shoulder portraits
you hold the camera firmly, as shown in the picture above, and architectural shots. Hold the camera as shown above.
cradling the body of the Autoreflex-T against the face. This position prevents accidentally pushing the lens release
Depress the shutter release button firrnly but gently. Do not button.
punch the shutter release button but squeeze the exposure
off smoothly for 'Jar-free" operation.
24View original page 25Page 27 · Read text
TAKE ADVANTAGE OF DEPTH-OF.FIELD
Depth-of-Field is the distance between the nearest and Depth-of-Field for f/ 16
farthest objects in the scene that will be sharp in the finished for f 14 picture. In practical terms this means that when you bring an
object into sharp focus, objects behind and in front of this
will be rendered more or less sharp too, depending on a series
of factors. For more Depth-of-Field, use a small f/stop (larger
f/number) and make the irna$e of the nain object snuller by:
.(a) moving the camera further away or (b) switching to a
shorter focal length lens without changing camera distance.
(smaller use less 8s6 t,/ a larger r f/number) f/stop For Depth-of-Field, yr \8tl moving laryer and by: (a') object nuke the nuin the image of /\
Scale closer (b) switching to a longer focal length the camera or (sr) Distance \ \ (7) Distance / camera changing distance. lens Scale without (52) Infrared Film
Compensation / (6) Depth-of-Field Scale Mark
INFRARED FILM COMPENSATION MARK
Infrared rays come to a different focus than visible light
Using Depth-of-Field Scale on Lens: rays. When shooting infrared film with the appropriate filter,
focus as usual. Then bring the distance figure opposite the
On the Depth-of-Field Scale, f/stop markings identical to Distance Scale Index Mark (51) into line with the Infrared
those on the Manual Aperture Scale (8), are repeated to Com pensation Mark (52).
the right and left of the Distance Scale Index Mark (51). The
Depth-of-Field for any focdsed distance will be found
between any two identical f/stop markings on the Depth-of-
Field Scate. Thus, if the lens is focused at 30 feet and the
picture is to be made at f/16, referring to f/16 on both sides FOCAL PLANE MARK of the scale tells us that the Depth-of-Field extends from
Infini$ to about 13 feet. For maximum Depth'of-Field, The distances on the Distance Scale (7) are calculated from
including Infinity, set the Infinity mark at the f/stop in use, the Focal Plane Mark '+" (18) which indicates the position
on the right hand side of the scale. of the film in the camera.
26View original page 27Page 31 · Read text
FLASH PHOTOGRAPHY
The all metal Copal Square S focal plane shutter is )
synchronized for use with flash bulbs and electronic flash. j--* These light sources are useful for making action-stopping
photos in dim light. Their high light output makes it posible
to produce negatives that have good Depth-of-Field too, and
overall sharpness. Flash and electronic t-lash are also used
outdoors to [ghten or fill in deep shadows.
S',, I
Two standard "PC" flash outlets are provided on the front of
the KONICA Autoreflex-T. The upper or "M" outlet, is for
use with expendable flash bulbs or flash cubes. The lower, or
"X" outlet, is for use with electronic flash.
The "M" 0utlet: rnis is for use with the standard "M"
type flash bulbs or focal plane type bulbs or flash cubes. All
speeds to 1/1000 may be used. ("M" delay is l8 milli-
seconds.)
The "X" 0utlet: This is for use with electronic flash
units. The Copal Square S strutter synchronizes these at all
shutter speeds up to Ill25 second. ("X" delay is 0
milliseconds.)
30View original page 31Page 33 · Read text
CHANGING LENSES
To Remove the Lens To Mount Your Lens
from the Camera: on the Camera:
Depress the Lens Release Button (23), grip the silver portion To mount a KONICA lens on the Autoreflex-T, line up the
of the lens barrel, turn lens barrel counterclockwise until the red dot on the lens barrel with the red dot on the camera
two red dots (one on the camera body and the other on the body. The lens will "seat" into the camera body easily. Then
lens barrel) align. The lens will then come off the camera. grip the silver part of the lens barrel and turn the lens
clockwise until it clicks into place.
NOTES:
When the lens is removed, do not touch any part of the
interior of the camera.
If the lens is to be left off the camera for any length of time,
protect the camera interior from dust and moisture by use of
a KONICA Body Cap. Where this is not available, keep the
camera in a case or dustproof container.
32View original page 33Page 37 · Read text
ACCESSORIES
'o Lens Hoods KONICA LENS MOUNT ADAPTERS
Prevent stray light from striking o K0NICA Adapterlens surfaces and causing unwanted
reflections. Each KONICA Lens Permits use of KONICA F, FS, FP, FM lenses with
Hood is specifically calculated and "match-needle" expostlre automation.
shaped t9 give maximum Protection to the lehs on which it is used. . Exakta Adapter 2
Permits use of Exakta lenses with "match-needle" exposure
automation.
o Praktica Adapter 2
Permits use of Pentax/Praktica lenses with "match-needle"
exposure automation.
o Nikon Adapter
Permits use of Nikon lenses with "match-needle" exposureryry automation. . Cube Flash
With PC cord (for Autoreflex-T)
and hot shoe contact. Built-in test o Close-Up Attachment-Lens 55d circuit with indicator light that
shows when cube is readY to fre. The No. 1 permits close-ups in a range from 25" to
With exposure guide table and case. l2/2"; the No.2 from 14" to 11". Both may be
combined for a range of llYz" to 9". They screw into
the lens like a filter. For use with normal lenses. No
change in exposure is necessary. ,{ffi M KoN,cA .w -
.l ffiffi --rView original page 37Page 38 · Read text
www.butkus.us
KONICA )c AUTOREFLEX
o Accesory Clip 3 o Extension Bellows 2 cn
Fits over the eyepiece of the KOMCA Used for the same purposes as extension rings. However, bellows are 8
Autoreflex-T. Useful for mounting small more flexible since extension is continuously variable instead of in fixed C
flash or electronic flash units. sections Larger image size possible than with ring set. 2
ng
o Extension Bellows 2 and :'+*' \
Slide Copier
A deluxe version of the Extension
Bellows 2.
Permits changing position of camera
body on track, in addition to having
lens movement. Slide copier is litted to
end of the lens in use, forms light-tight,
integral unit.
o Extension Ring 2
Used to extend the close focusing range of
Hexanon lenses. Inserted between lens and
camera. A full set enables making l:l or life
size pictures using a normal lens.
3;View original page 38Related documents and language editions
KonicaPDF
Konica Autoreflex T 2
User manual
35 pages · EnglishRead →
KonicaPDF
Konica Autoreflex T — first version
User manual
41 pages · EnglishRead →
KonicaPDF
Konica Autoreflex TPublic Relations Booklet
Product booklet
20 pages · EnglishRead →
KonicaPDF
Konica Autoreflex T 01
User manual
72 pages · German, French, SpanishRead →
From the M. Butkus archive. Original publisher and archive notices are retained.
Check the model and edition against your equipment.
PDF verified 2026-10-10.