Singer 9W1 and 9W7 Parts List — Parts list

Instructions for Ordering
                                                            LIST OF PARTS COMPLETE

                                                                                    FOR
    In ordering from this list. use ONLY the PART Dumber in
the FIRST column.
     'The number stamped on a Sewing Machine Part is the
number of the Single Part only, except when the part includes Set
screws. ramming screws                         on, Small
Wires riveted, orFarts soldered together,
Decessary to furnish in combination
   Every combination of parts sent out has its specifc number
 which, although not stamped on Parts (except in above cases)
must be used when ordering the combination.
    Each number always indicates the SAME PART in whataver

    'he letters arrer someor a numbers indicate Me sire
anish only, as Iollows:


                c. Hardened onlv.
           D. Polished only.
             E. soft, not polished.                       MACHINE No. 9w1
                      F. ardened and Polished.
                                                                                                      (For Family USE)

    These lefters MUST BE USED when they appear in the lig                                                                                                                          Each
and AFTER the number. as in the list.                                               No.    Plate         Name
   ma Dis series                                                                      *202001
      200001 10 201500 are Screw Numbers.                                                                                 20?006
                                                                                   Thuml Screw       201501 to 201800 are Nut Numbers.                                             11833
                                                                                     10%05
                                                                                        Wasner
   The figures in the second column refer one to the plata                            10202
in Which the lustraton of the part is shown and are                                      11886
 BE USED in ordering.
         or more numbers over a cut indicate that the difference                              and two 200054E..............
                                                                              10202 Arm Shat Connection
   Parts marked with an asterisk (* are furnished only shen
                                                                     10908